1974 Corvette OEM Parts, A/C & Others
#1
Advanced
Thread Starter
Member Since: Jul 2007
Location: Tampa Florida and Wisconsin
Posts: 66
Likes: 0
Received 1 Like
on
1 Post
1974 Corvette OEM Parts, A/C & Others
Hi: I have a set of parts from a 1974 Corvette, small block coupe. The car was a very well kept, nice car and only had 68,000 miles on it. These are not parts from a junk, trashed, orphaned Corvette. If I can sell ALL of the parts to one party, I will discount them. Otherwise, off to eBay they go one-by-one, which I really don't have time to do. I don't have part numbers or photos yet, but plan to do that when I can get to it. Everything is as-is, no warranty. They are all used parts and I have no idea about the fitness of any of them. Every part was already removed from the car when I purchased it and the owner did not know if anything worked, or did not work. Shipping will be by a UPS shop and the buyer will be responsible for the total net cost -- it won't be cheap since some of the items are heavy (compressor) and oversized (condenser). Here's the list:
1) OEM AM/FM Radio with original Amp
2) OEM Carb from the Corvette
3) OEM VIR valve
4) OEM Compressor
5) OEM Tack drive distributor
6) OEM Full (maybe partial) ignition shielding set (needs to be cleaned up)
7) OEM A/C Condensor unit
8) Two new radiator hoses, may or may not be for Corvette
9) FelPro full gasket set for 1955-1979 Chevrolet small block
10) FelPro valve cover gasket set, Corvette small block
11) Small misc items which I will include, may not be worth anything
Buy it all for $300 -- sell what you don't need on eBay (or, sell all of it piece by piece if you have the patience for that, which I don't).
No returns. No warranty. No complaining. I will not sell the parts individually on the forum. Parts look to be in decent shape. A/C parts were removed to install a modern R134a system. I was told the A/C system worked prior to removal. The shielding is dirty and has some spray paint on it. Top chrome piece is in very nice shape. Assumed the carb was not working which is probably why it was removed. FelPro gaskets are still in the original boxes. Radio probably worked but was replaced by a more modern stereo system. Distributor was removed and replaced with an MSD unit and worked prior to removal.
Parts are located in Tampa, FL (33609) for shipping related estimates.
Photos to come when I have time to photograph and upload.
1) OEM AM/FM Radio with original Amp
2) OEM Carb from the Corvette
3) OEM VIR valve
4) OEM Compressor
5) OEM Tack drive distributor
6) OEM Full (maybe partial) ignition shielding set (needs to be cleaned up)
7) OEM A/C Condensor unit
8) Two new radiator hoses, may or may not be for Corvette
9) FelPro full gasket set for 1955-1979 Chevrolet small block
10) FelPro valve cover gasket set, Corvette small block
11) Small misc items which I will include, may not be worth anything
Buy it all for $300 -- sell what you don't need on eBay (or, sell all of it piece by piece if you have the patience for that, which I don't).
No returns. No warranty. No complaining. I will not sell the parts individually on the forum. Parts look to be in decent shape. A/C parts were removed to install a modern R134a system. I was told the A/C system worked prior to removal. The shielding is dirty and has some spray paint on it. Top chrome piece is in very nice shape. Assumed the carb was not working which is probably why it was removed. FelPro gaskets are still in the original boxes. Radio probably worked but was replaced by a more modern stereo system. Distributor was removed and replaced with an MSD unit and worked prior to removal.
Parts are located in Tampa, FL (33609) for shipping related estimates.
Photos to come when I have time to photograph and upload.
Last edited by Inca59; 05-18-2011 at 09:27 AM. Reason: Additonal information
#3
Instructor
Member Since: Mar 2011
Location: Lexington North Carolina
Posts: 130
Received 0 Likes
on
0 Posts
I need the Tach drive Distributor and the Radio. Anyone out need the rest of the parts? I will chip in $100 we can just buy all of it one time. Please let me know. My Distributor is almost gone.
#6
Advanced
Thread Starter
Member Since: Jul 2007
Location: Tampa Florida and Wisconsin
Posts: 66
Likes: 0
Received 1 Like
on
1 Post
The parts on eBay, selling one at a time, adds up to about $600+ in value -- that's at a lower than normal buy-it-now pricing. I researched everything last night. I figure it's worth the discount plus that will help with the shipping and I can unload it all with one trip to UPS. The cost to pack/ship will be net to the buyer. No handling or up-charges. Whoever buys everything can part out that they don't want. It's worth $300 for me not to deal with this one at a time on eBay. Thanks! – Inca59
#7
Advanced
Thread Starter
Member Since: Jul 2007
Location: Tampa Florida and Wisconsin
Posts: 66
Likes: 0
Received 1 Like
on
1 Post
Posting to the top. Will probably start getting parts ready for eBay tomorrow as this stuff has got to go. If you're looking for individual parts from what I have listed. Look for them on eBay with reasonable buy-it-now prices. Thanks! Inca59