parting the '75 out, mang.
#1
CFOT Attention Whore
Thread Starter
parting the '75 out, mang.
o.k. so not surprisingly the guy has bailed on me so i'm parting out this '75 L-48/auto.
first to post has dibs
here's how i'm doing this. everything i list will have pricing, but since i don't know what's truly fair, i'll still do "OBO". however, not to step on toes the OBO only applies to something nobody claims at my list price. in other words, if i have a widget you need for yours and i'm asking $20 but you're only willing to pay $10. if nobody else wants it at $20 and i can take $10, then it's yours. easy, no?
first person to call "i want ____" has dibs.
prices do not include shipping. count on all mechanical parts needing a thorough inspection/rebuild.
now, what's NOT available:
engine
transmission
rear bumper
hood (maybe)
driver door handle
despite being complete most of the interior soft parts are not salvagable. a couple are so if there's something in particular you need (soft parts), let me know and i'll give you a best description of condition.
what is available:
pumpkin (auto trans car) w/crossmember--$250
T/A's--$100/ea or both $150 pending
stock struts and bracket--$40
stock rear anti sway bar w/hardware (7/16"?)--$40 pending
halfshafts--$20/both pending
driveshaft--$20
both doors--$100ea or both for $150 (pass door needs to be patched where mirror bolts, holes stripped) pending
door glass w/hardware (power windows) $25/ea or both for $40
rear glass--$25 (providing i can remove it without F-ing it up)
t-bar chrome--$20
groovy "moon roofs"--$200/pr (*needs weatherstripping* but otherwise, fair condition) pending
rocker mouldings--$20/pr
auto trans crossmember--$40 pending
tilt/tele steering column w/cruise control--$75 (steering wheel not included)...pending to captanpants
stock tach--$40 pending
center console w/gauges--$50
gas lid w/emblem--$20 pending
groovy headlight assemblies--$80
brake calipers, all four--$50 pending
cruise control diapragm and cable--$20
power steering pump--$20
power steering ram--$20
steering box--$25 pending
radiator support--$40 pending
front anti sway bar (7/8"?)--$40
wiper motor and hardware--$20 pending
front a-arms and spindles--$40 each or both for $60 pending
front side markers--$10/pr pending
rear side markers--$10/pr pending
seats--$30/ea or $50/both (need to be recovered)
AC condensor--$10 pending
front "crash bar"/vacuum thingy--$25
there's still bunches of other small stuff available. let me know what you're looking for and i'll see if i have it and condition.
the frame and shell are available as well. this is a west coast car so there's very little (surface) rust on it. the frame looks completely straight with no signs of damage. the birdcage has some rust in the a-pillar area that appears to be mostly surface or just a little more but nothing even close to "through the metal". if you want the frame and shell--$200.
if you want to pick anything up in person, the car is located in las vegas (for the socal peeps)
for a better idea of conditions of certain things, check out the photos on this thread:
http://forums.corvetteforum.com/show....php?t=2158210
as long as i'm at this, i have a few other things to list as well.
1) summit brand 7qt oil pan for DS dipstick kickouts with trap doors (circle track style) and pick up--$60
2) borg warner super T-10 from my '81. fairly fresh rebuild (10k-20k miles)--$500
3) '80-82 front bumper grilles and turn lights, fair DD shape.
Originally Posted by moderator thread
The seller will determine who they want to sell their item/product to based on the expediency of payment, payment method, location, and overall ease of transaction. While some may feel that the first to commit to purchase in the thread would make it easy, it may not be for the seller. If another buyer lives nearby and can save the trouble of shipping, etc. the seller can move onto that buyer let's remember, it is his item/product for sale.
here's how i'm doing this. everything i list will have pricing, but since i don't know what's truly fair, i'll still do "OBO". however, not to step on toes the OBO only applies to something nobody claims at my list price. in other words, if i have a widget you need for yours and i'm asking $20 but you're only willing to pay $10. if nobody else wants it at $20 and i can take $10, then it's yours. easy, no?
first person to call "i want ____" has dibs.
prices do not include shipping. count on all mechanical parts needing a thorough inspection/rebuild.
now, what's NOT available:
engine
transmission
rear bumper
hood (maybe)
driver door handle
despite being complete most of the interior soft parts are not salvagable. a couple are so if there's something in particular you need (soft parts), let me know and i'll give you a best description of condition.
what is available:
pumpkin (auto trans car) w/crossmember--$250
T/A's--$100/ea or both $150 pending
stock struts and bracket--$40
stock rear anti sway bar w/hardware (7/16"?)--$40 pending
halfshafts--$20/both pending
driveshaft--$20
both doors--$100ea or both for $150 (pass door needs to be patched where mirror bolts, holes stripped) pending
door glass w/hardware (power windows) $25/ea or both for $40
rear glass--$25 (providing i can remove it without F-ing it up)
t-bar chrome--$20
groovy "moon roofs"--$200/pr (*needs weatherstripping* but otherwise, fair condition) pending
rocker mouldings--$20/pr
auto trans crossmember--$40 pending
tilt/tele steering column w/cruise control--$75 (steering wheel not included)...pending to captanpants
stock tach--$40 pending
center console w/gauges--$50
gas lid w/emblem--$20 pending
groovy headlight assemblies--$80
brake calipers, all four--$50 pending
cruise control diapragm and cable--$20
power steering pump--$20
power steering ram--$20
steering box--$25 pending
radiator support--$40 pending
front anti sway bar (7/8"?)--$40
wiper motor and hardware--$20 pending
front a-arms and spindles--$40 each or both for $60 pending
front side markers--$10/pr pending
rear side markers--$10/pr pending
seats--$30/ea or $50/both (need to be recovered)
AC condensor--$10 pending
front "crash bar"/vacuum thingy--$25
there's still bunches of other small stuff available. let me know what you're looking for and i'll see if i have it and condition.
the frame and shell are available as well. this is a west coast car so there's very little (surface) rust on it. the frame looks completely straight with no signs of damage. the birdcage has some rust in the a-pillar area that appears to be mostly surface or just a little more but nothing even close to "through the metal". if you want the frame and shell--$200.
if you want to pick anything up in person, the car is located in las vegas (for the socal peeps)
for a better idea of conditions of certain things, check out the photos on this thread:
http://forums.corvetteforum.com/show....php?t=2158210
as long as i'm at this, i have a few other things to list as well.
1) summit brand 7qt oil pan for DS dipstick kickouts with trap doors (circle track style) and pick up--$60
2) borg warner super T-10 from my '81. fairly fresh rebuild (10k-20k miles)--$500
3) '80-82 front bumper grilles and turn lights, fair DD shape.
Last edited by VegasJen; 10-29-2008 at 11:46 AM.
#2
Advanced
Member Since: Aug 2008
Location: North Muskegon MI.
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
i want tilt / tele pm and yes i still want it just need to know where to send cash!!!!!
Last edited by captanpants; 11-03-2008 at 08:27 PM. Reason: just ading info
#13
CFOT Attention Whore
Thread Starter
i don't think i'd sell these. too ratty.
another forum member has dibs. same for moon roofs. i'll keep you in line though.
try to get pics tomorrow.
not exactly. these are those "80's" style where someone put the rectangular ones in place of the round ones. (why? i have no idea). you can kind of see them in the pic of the front in the thread linked to the bottom of the original post.
#16
Le Mans Master
If they are complete assemblies (frames, buckets, doors) and they are not broken, I'm still interested pending shipping charges to 35749
#17
CFOT Attention Whore
Thread Starter
are you talking about the center gauge console? or soft parts? if you're talking about soft parts, they're really rough.
first in line. i'll take pics.