Cole Neadow

I bought new leather for the seats on my 80 and can't remember how to remove them from the plastic part. I tried pushing them down and back with no success I did not want to push to hard till I found out if this was correct or not, I am doing bottoms and backs. any suggestions. The seats are still in the car.
Thanks
Cole

thrilher

push from side to center on the back. the wire runs from top to bottom. get a screwdriver and press against the wire for best results with minimal damage to foam

Duke94

Cole Neadow

Thanks

Ron R

The bottoms are easy once the backs are removed. Getting the backs IN is harder.