parts wanted - various 64,65 SHP components

[Allcoupedup]

looking for good (maybe decent) or better condition - can anyone help me out knocked some of these off and added a few more crankcase vent tube hose LT1 camshaft (federal- mogul) mechanical lifters (federal-mogul) Carb rebuild kit Choke tube accelerator rod accelerator swivel fitting - carb to oil filler hose fitting - fuel line to carb timing chain and gear set timing chain cover gasket fel-pro one oiece oil pan gasket intake manifold bolt kit M silver intake manifold gasket vacuum advance tube vacuum advance hose vacuum advance can (VC1810) fuel filter to upper hose fitting fuel filter to carb hose idler pully idler pulley mount idler pulley bearing transmission mount cushion upper radiator hose lower radiator hose distributor hold down intake bypass hose the repros are so expensive :cry [Modified by Allcoupedup, 11:01 PM 9/10/2003]

[Nicky71]

Brian,

I have a tranny mount from CC new in the box. I decided to put an Energy Susp. Polyurethane mount on mine, so I'm not going to use it. Its yours for free if you want it.

Later,

[John Lynch]

Do you have a picture of the oil filler tube that you are looking for or a part number in one of the catalogues that I can use for reference? I have a few fo these tubes and don't know which applications they fit.
Thanks,
John

[Allcoupedup]

Nick,
Hopefully my garage will be done my Labor day and I'll have the '65 back. We can go for a cruise. I'll drop you a line. I could definately use the part. Seeing one mid year ripping down the road is topped only more more than one midyear ripping down the road.

Thanks,
brian

[Allcoupedup]

John,
It's 302108 at corvette central, m-274 in Zip's catalog, and 22D at Long Island Corvette, Paragon part #1250 and GM part 3846102.

It's the chrome version and it's press fit.


Thanks,
brian

[Biggus Blockus]

I have your oil fill tube with cap - not a repop - very nice slighly used.

$50.00

let me know if you would like it.

thanks!

[Allcoupedup]

won a NOS piece on EBAY yesterday.
Thanks

[Nicky71]

Cool, drop me a line whenever nick_liarakos@yahoo.com

[BayRay]

I have a complete idler pulley setup. I just installed power steering last weekend so I see no need to hang on to it. My original engine is long gone, so I am not concerned about keeping it pure original, just original looking, if that makes sense. I think I also have a thermostate housing. I need to check the numbers on it again to make sure. I haven't put much thought into what I would take for the parts so just shoot me a reasonable offer. I'll be out of town until Monday thou in case you are looking for a fast response. You can email me at humrich@charter.net if interested.

Take Care
BayRay