Location: 1961 Red w/White coves 85,532 Original Miles
Re: 1964 327/365hp rebuilt engine for sale (win1876)
Heres the information on the engine:
327 Chevy Small Block casting # 3782870
Block Date Code E114
Pad Stamping F0512R These are the only numbers on the pad.
A serial number was never stamped on this block. The original factory broach marks are on the pad.
I believe this to be a replacement engine issued in 1964 because of the missing serial number and the missing additional letter next to the “R” to designate the application.
When I got this engine it was standard bore and had dome pistons in it and the 5 quart oil pan.
The engine block was cleaned and magnafluxed.
It was bored -.030”, and new TRW L2166NF forged pistons and moly rings were installed.
The steel crank was ground and all new bearings installed.
A new 327/365hp solid lifter cam and bearings has been installed.
All freeze plugs are installed. A new oil pump is installed
The pan is an original 5 quart large capacity pan with baffle and is installed.
The engine was completely balanced.
The heads are double hump 2.02 and 1.60, dated H1164 and H1064 casting number 3782461
They have been completely cleaned, magnafluxed, machined and new hard seats installed. No porting has been done on these heads.
They have screw in studs with guideplates and new stainless steel valves, and springs.
The heads have not been installed.
I have the original aluminum intake casting # 3844461, Holley 2818-1 carb (service replacement date) , and tach drive distributor.
I have new lifters, push rods, rocker arms, and original Aluminum corvette valve covers.
I have the draft tube baffle that goes under the intake manifold, and the original oil filter housing.
I have the water pump, the original pulleys, and a HP balancer ( not a finned one).
I have the correct 2 ½” exhaust manifolds also.
All of the new parts were purchased from PAW, and all machine work was performed by a professional engine builder and machine shop. All parts are very clean and in very good to excellent condition.
I am asking $3,900 for everything. If you need pictures, please email me.
I live in Lincoln, Nebraska and would help with crating and shipping or arrange for pickup. This is an excellent opportunity for someone to put a 327/365hp engine back in their car.
Corvette Store
1964 327/365hp rebuilt engine for sale
