When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Time to reduce the Corvette parts inventory. Almost all is parts off my 65 or parts that were for my 65. There are a couple other MY specific parts. Some stuff is new and some is used. There is even some free stuff. All parts are plus shipping. I would prefer not to ship especially the heavy stuff so I will meet local guys somewhere and save shipping. I am in central Maryland, 21157 zip. Please PM if you have any interest so I can keep everything straight.
Thanks
Tom
VBP sway bar kit front and rear new. 1 1/8” front and ¾” rear $200 Sale pending
VBP ¾” rear sway bar with mounts and hardware used. $60
New Delco steering stabilizer with used mounting hardware. $60 Sale pending
VBP used offset boxed upper control arms with bushings and ball joints. I would replace the ball joints before use just cause. $200 for the pair
VBP heavy duty idler arm new. $25 Sold
VBP Tie rod sleeves and tie rod ends new. $75 Sold
VBP poly diff mount bushing new. $15
VBP smart strut kit new. $150 Sold
If you decide to ship, I am interested in the rear sway bar. Thanks
Your are talking about the used rear bar and brackets only correct? PM me your address so I can get a shipping price and I will see if I can find a box to ship it in.
Your are talking about the used rear bar and brackets only correct? PM me your address so I can get a shipping price and I will see if I can find a box to ship it in.
stingraymax
Looks looks like I can get the Smart Strut kit in a USPS flat rate box for under $14.00, $12.65 for the box plus $.76 tax. Insurance would be more but I can't get that price until Monday.
NECorvette1976
Still looking for a box long enough.
Would the sway bars and stabilizer fit a 64?? Where in md?
Yes on the sway bars. I'm not sure if the rear mounting nut plates are in the frame on 64. If not you would have to but nuts on to hold the brackets. The stabilizer will not with the big oil pan that is on some engines. 250 and 300 hp should be ok.
I'm in Westminster MD. If you decide they will fit your needs I will meet you somewhere if it helps.
Yes on the sway bars. I'm not sure if the rear mounting nut plates are in the frame on 64. If not you would have to but nuts on to hold the brackets. The stabilizer will not with the big oil pan that is on some engines. 250 and 300 hp should be ok.
I'm in Westminster MD. If you decide they will fit your needs I will meet you somewhere if it helps.
Tom
Sounds good. Looking for the front and rear sways and the stabilizer but please give me until tomorrow to finalize.
stingraymax
Looks looks like I can get the Smart Strut kit in a USPS flat rate box for under $14.00, $12.65 for the box plus $.76 tax. Insurance would be more but I can't get that price until Monday.
NECorvette1976
Still looking for a box long enough.
Not yet. I took the bar to the UPS store to see if I could just wrap it in brown paper and ship the brackets in a box. The guy said I could. I asked for an estimate based on weight and size to Nebraska, guessing that is where you are from your sig. He said $52. I said WHAT!!!!! He said $52. I said See ya!
I Thought UPS would be the cheapest way? You want me to keep looking for a box?
Tom
Not yet. I took the bar to the UPS store to see if I could just wrap it in brown paper and ship the brackets in a box. The guy said I could. I asked for an estimate based on weight and size to Nebraska, guessing that is where you are from your sig. He said $52. I said WHAT!!!!! He said $52. I said See ya!
I Thought UPS would be the cheapest way? You want me to keep looking for a box?
Tom
Sky65. Try Fed Ex Ground. Takes longer but better price point. IMO.
Thanks for all the effort. I would say if it doesn't work out with Fedex, then we'll just call it.
Well Fedex is still close to $40. I don't understand why it is so high. I have not found a box for it yet but I am willing to keep looking if you still want the bar. Your call. Let me know.
11-13-2014, 09:31 AM
Midyear Parts for Sale Part 1
