638HP

Looking for a nice set of original Cylinder Head Bolts for a 1960. Please PM. Many thanks.

0Corvettes by George

Do you know the head markings?
I have several sets of C1 head bolts.
G
geopar@gvtc.com
210 748 4693

638HP

Thank you for your reply George. Unfortunately I do not have a picture of the bolts, however my understanding the head markings should either have a “F-C” centered within a single circle on a flat hex head or alternatively a “TR” centered on flat hex head. The set should be a total of 34-bolts, consisting of 18-long and 16-short bolts. Let me know if you have such a set or know if another bolt marking type is acceptable per NCRS judging standards. Thanks.

Talisman51

Know i have a set of originals from 65. Will check head markings. I will email a photo. Ps...as you know nobody is going to pull your valve covers. The outboard short bolts are really all thats visible. JimV

638HP

Thanks Jim. I am assembling a historical photo album of the restoration process to include engine internals, thus the desire to have correct bolt head markings.

Enoch

If George does not have them let me know. I have a few hundred sets. Many different headmarkings. Thanks.