This is the section starting at the #3 cross member and leading to the rear. It was cut from the frame that came with my '66 project car. It has solid upper kick ups but needs repairs on the left and right sides adjacent to the sombrous.
The rear and #4 cross members are fine. #3 is 80% OK on the top half but the bottom needs the outer ends or the entire lower half replaced with is available aftermarket. Extreme lower extensions of the kick ups are gone but from the top of #3 is fine.
If interested and need photos, send a reply and I will send those areas.
Asking price is $400 plus transportation or pick up from Rhode Island area. If you only need a part or section, I will cut it if you pay the asking or negotiated price. Offers will be considered but I already have several of those.
I'm interested in the rear frame section from the rearmost body mount to the bumper, approximately the last 12", if you would be interested in cutting out this part of the frame to sell separately let me know.
-Steve
Steve, I'll start a list to see if cutting this up is easier than offering the entire section as one. My goal is $400 and no charge for cutting it up. One offer was PM'd but was not the asking price and he is on the list as well.
Let's see how it goes and thanks for your interest.
This rear section is still available and will be parted out once the asking price is met. If you don't want the entire section, I will accept $400 for any part of it. The goal is not to keep it complete, just to meet the asking price which started out higher and is now firm at $400.00 plus transportation. I am willing to trailer it locally within a reasonable distance under 50 miles.
Corvette Store
FS: rear frame section
