When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Good morning guys, I need a bit of help, what I am looking for is a clear focused picture of a ballast resistor in its correct orientation with the original wires in their correct position & likewise for the distributor coil before the covers are installed, this would be for a 65 327/350 horse car. I am replacing a butchered harness with a new factory correct harness from Lectric Limited. So, even though I have a schematic from two different vendors, I'm still getting cross eyed trying to figure it all out, I appreciate any help offered, also is anyone rebuilding antennas and or tele columns these days. Thanks.
Don
Thanks, good pic, but I need to see which color wires go to the ballast & which color wires go to the coil, I can make out the top of the resister but none of the others, your picture does help some.
1607674027[/url]]Thanks, good pic, but I need to see which color wires go to the ballast & which color wires go to the coil, I can make out the top of the resister but none of the others, your picture does help some.
Mine are faded red / pink both in (Top of resistor) and out (Bottom)
03-31-2024, 11:55 AM
Need clear photo
