Vintage air
#1
Advanced
Thread Starter
Vintage air
Does any one have pictures of the area below the glove box in a C2 after installing the Evaporator Sub Case. I am interested in how far it hangs below the bottom of the glove box door.
#2
Melting Slicks
Maybe not the best photo because the kit comes with a plastic horizontal duct that runs along the bottom of the glovebox and extends down to just about cover that black bolt and silver washer.
Last edited by Ken Sungela; 03-21-2024 at 10:55 PM.
#3
Melting Slicks
Member Since: Apr 2002
Location: Ellicott City Maryland
Posts: 2,884
Received 1,963 Likes
on
665 Posts
Here's a photo of mine with the plastic horizontal duct that runs along the bottom of the glovebox in place. My camera was on top of the seat to get this view . . . you really don't notice it that much when you're sitting in the seat and it doesn't affect the foot room!
Tom
Tom
The following users liked this post:
mblake101 (03-22-2024)
The following users liked this post:
tvtommy (03-22-2024)
#6
Le Mans Master
#7
Intermediate
All good. I know it’s on correctly, the arrow on the hose points towards the RAD. I can see how people could make that mistake.
My VA compressor was noticeably loose, and has since been tightened. After changing to a hose with spring inside it, I placed a shield on the rad hose to see if the belt is still hitting it like it did when the compressor was loose.
My VA compressor was noticeably loose, and has since been tightened. After changing to a hose with spring inside it, I placed a shield on the rad hose to see if the belt is still hitting it like it did when the compressor was loose.