[C2] ST-10 Trans with NHRA cast into main body
#1
ST-10 Trans with NHRA cast into main body
Looking for information on my ST-10 transmission. It has the large t400 style output, cast steel housing and NHRA cast into the main body. Thanks in advance.
#3
Race Director
Member Since: Feb 2007
Location: northern california
Posts: 13,629
Received 6,547 Likes
on
3,011 Posts
C2 of Year Finalist (track prepared) 2019
Post pictures if possible.
#6
Burning Brakes
I'm not aware of a NHRA casted ST-10 main case. They did make a 904 nodular iron main case versions which is the same as the 903 aluminum main case just out of nodular iron. I had one and they take quite a lot of abuse. Upload photos I'm curious what that looks like.
#7
I'm not aware of a NHRA casted ST-10 main case. They did make a 904 nodular iron main case versions which is the same as the 903 aluminum main case just out of nodular iron. I had one and they take quite a lot of abuse. Upload photos I'm curious what that looks like.
#9
Racer
Doug Nash made some cast iron Muncie main cases(I have 2 of them) and I have several 904 nodular iron ST-10 main cases.
But I never heard of NHRA cast into a Super T-10 main cases.
I would like to see some pictures if you can.
Thanks... Eric
But I never heard of NHRA cast into a Super T-10 main cases.
I would like to see some pictures if you can.
Thanks... Eric
#10
Trying to get a pic, but it is tight quarters around that transmission.