[C2] 1967 Rocker Mouldings?
08-30-2018, 06:53 PM
#1
Burning Brakes
Thread Starter
1967 Rocker Mouldings?
Can someone explain why I can’t find 67 rocker mounding listed in any of the parts catalogs? I bought a 67 project ,and it came with 65 moundings.
Thanks!
Thanks!
08-30-2018, 07:05 PM
#2
Race Director
I thought all 1967 Corvettes had side pipes.
I just checked and even LICS shows them as NOT AVAILABLE. You may have to settle for used. I would put a WTB ad in our C2 Section and see what happens. You might also try David Sokolowski and David Crane, both in California. Poncho (Provette67) might also be someone to try. Send him a PM and inquire.
Larry
I just checked and even LICS shows them as NOT AVAILABLE. You may have to settle for used. I would put a WTB ad in our C2 Section and see what happens. You might also try David Sokolowski and David Crane, both in California. Poncho (Provette67) might also be someone to try. Send him a PM and inquire.
Larry
08-30-2018, 09:47 PM
#4
Drifting
I think central makes them, ive been trying to buy a new 65 grille for 6 months and they keep telling me the eta keeps getting pushed.
08-31-2018, 06:06 AM
#6
Team Owner
Some part sources are drying up and its a bit scary - later C1 dual quad air cleaner lids for instance....
I think lack of demand is affecting the supply - which is bad news...
I think lack of demand is affecting the supply - which is bad news...
08-31-2018, 08:59 AM
#7
Safety Car
I thought all 1967 Corvettes had side pipes.
I just checked and even LICS shows them as NOT AVAILABLE. You may have to settle for used. I would put a WTB ad in our C2 Section and see what happens. You might also try David Sokolowski and David Crane, both in California. Poncho (Provette67) might also be someone to try. Send him a PM and inquire.
Larry
I just checked and even LICS shows them as NOT AVAILABLE. You may have to settle for used. I would put a WTB ad in our C2 Section and see what happens. You might also try David Sokolowski and David Crane, both in California. Poncho (Provette67) might also be someone to try. Send him a PM and inquire.
Larry
08-31-2018, 09:38 AM
#8
I tried to find a set for my coupe. All vendors are out of stock. The guy that was manufacturing them went out of business and no one has taken the production over yet. Crane had an NOS set but be prepared to pay $1000. A set sold on Ebay (NOS) for $850. Probably a bargain.
I found a super nice used set by doing a Google search for $350 on Craigslist in PA and sold my used set on Ebay for $250. So, your only choice is to find used and repaint if decent or pay thru the nose for NOS.
I found a super nice used set by doing a Google search for $350 on Craigslist in PA and sold my used set on Ebay for $250. So, your only choice is to find used and repaint if decent or pay thru the nose for NOS.