C1 & C2 Corvettes General C1 Corvette & C2 Corvette Discussion, Technical Info, Performance Upgrades, Project Builds, Restorations

Anybody using a wheel clamp as an anti-theft device?

Thread Tools
 
Search this Thread
 
Old 07-24-2014, 11:50 PM
  #1  
rwerth7
Racer
Thread Starter
 
rwerth7's Avatar
 
Member Since: Feb 2010
Posts: 352
Likes: 0
Received 7 Likes on 7 Posts
Default Anybody using a wheel clamp as an anti-theft device?

Like the "Denver Boot".

If so which is best and works on the C2 with repo knockoff wheels?
Old 07-25-2014, 08:24 PM
  #2  
bcwaller
Burning Brakes
 
bcwaller's Avatar
 
Member Since: Jan 2002
Location: Redondo Beach CA
Posts: 1,200
Received 61 Likes on 50 Posts
C2 of Year Finalist (performance mods) 2019

Default

I seriously doubt anyone carries one of these around with them. They are really heavy and bulky. If someone really wants to steal your car, they will. I've seen cars winched onto flatbeds with wheels locked and skidding.

What you can do is set up more than one anti-theft device. You can add a pretty simple switch to ground out the coil which will let the car crank, but never start. This will work for all casual thieves. Add in a secondary measure such as a fuel cut off switch, brake line lock, or just take the main coil wire with you (or distributor cap), and you cover jsut about anything you would ever be able to prevent.
Old 07-26-2014, 10:25 AM
  #3  
Roger Walling
Melting Slicks
 
Roger Walling's Avatar
 
Member Since: Sep 2013
Location: Chicopee MA.
Posts: 2,721
Received 1,589 Likes on 661 Posts

Default

You could run a chain thru the wheels and lock it to a mail box.

Then, WHEN, they steal it (with the mail box) it will be a Federal offence.
Old 07-26-2014, 11:44 AM
  #4  
rwerth7
Racer
Thread Starter
 
rwerth7's Avatar
 
Member Since: Feb 2010
Posts: 352
Likes: 0
Received 7 Likes on 7 Posts
Default

Originally Posted by Roger Walling
You could run a chain thru the wheels and lock it to a mail box.

Then, WHEN, they steal it (with the mail box) it will be a Federal offence.
Good idea except I have the repro nock off wheels and the slots are too narrow for a chain.

How about if you sit on my car and baby sit it. Then when it gets stolen it will be a Federal offense due to the kidnapping!
Old 07-26-2014, 11:58 AM
  #5  
Al T
Burning Brakes
 
Al T's Avatar
 
Member Since: Jan 2009
Location: Alberta/Missouri....... depending when.
Posts: 796
Received 30 Likes on 23 Posts

Default

I've got a better solution............. you take something like this



...... and do this to it.



There is definitely no worry of theft! It's been "safe" for nearly two years....

Last edited by Al T; 07-26-2014 at 12:16 PM.
Old 07-26-2014, 03:46 PM
  #6  
Bluestripe67
Race Director
Support Corvetteforum!
 
Bluestripe67's Avatar
 
Member Since: Jan 2002
Location: Close to DC
Posts: 14,535
Received 2,126 Likes on 1,465 Posts
C2 of the Year Finalist - Modified 2020

Default

As bcwaller said put in a hidden kill switch...keeping it simple works best. Dennis
Old 07-27-2014, 01:49 AM
  #7  
00fxd
Melting Slicks
 
00fxd's Avatar
 
Member Since: May 2002
Location: Penticton B.C. Canada
Posts: 2,225
Received 41 Likes on 39 Posts

Default

If you think that a professional thief has any inclination to drive your mid year away you are dreaming. It'll be grabbed up by a rollback and be gone. Joyriders are the least of your worries IMHO - tho it does happen. Respectfully speaking - coil wires and kill switches are kids stuff and a good enough set of bolt cutters will quickly deal will pretty well any chain that you can handle ...

Sweet GTO ... a '64 coupe is on my bucket list
Old 07-27-2014, 02:22 AM
  #8  
Gary's '66
Melting Slicks
Support Corvetteforum!
 
Gary's '66's Avatar
 
Member Since: Jun 2012
Location: Wilton Ca.
Posts: 3,115
Received 192 Likes on 162 Posts

Default

A kill switch certainly couldn't hurt along with some sort of an alarm system. There are some that offer a remote pager or that can even be used with a cell phone.
IMO, the most prudent thing to do is to keep an eye on it as best you can and carry good, agreed upon, replacement value insurance.
Oh, and it doesn't hurt to know martial arts and have a CCW permit as well.
Old 07-27-2014, 01:46 PM
  #9  
Donald #31176
Melting Slicks
 
Donald #31176's Avatar
 
Member Since: Jul 2004
Location: Maryland
Posts: 2,800
Likes: 0
Received 163 Likes on 143 Posts

Default

The most fool proof thief deterrent as the late Dale Pearman said is a 1 inch thick chain wrapped around a tree and axle.
Old 07-27-2014, 03:19 PM
  #10  
sub006
Race Director
 
sub006's Avatar
 
Member Since: Jul 2005
Posts: 13,685
Received 59 Likes on 52 Posts

Default

If you run C2 ignition shielding, wouldn't it be be a PIA to remove and replace the coil wire?
Old 07-27-2014, 03:46 PM
  #11  
ghostrider20
Le Mans Master
 
ghostrider20's Avatar
 
Member Since: Jan 2002
Posts: 7,660
Received 235 Likes on 173 Posts

Default

Originally Posted by sub006
If you run C2 ignition shielding, wouldn't it be be a PIA to remove and replace the coil wire?
6 foot wire with alligator clamps, one to the pos. side of the battery, the other to the ballast resistor, either side in a pinch, but to the input side of the resistor if you had a second to spare

I always just try and park smart. Going out to the bars? Find a bank near by with a drive up window, park it in the drive through lane. Even though the bank is closed, the cameras are on. Enough to detour most criminals of opportunity. Also, cops on patrol watch areas like this. I would leave a piece of paper on the dash with my name and cell number. That way if someone wanted it moved or questioned why it was there, they could call me. Never had a call.

Other areas that are usually highly monitored
- Wal-Mart (tons of parking lot cameras and security).
- Large auto dealerships
- Chuckie Cheeze parking lot
- hotel parking ramps
- local municipal airport (small GA type, free parking)
- police station parking lot (usually downtown)
Old 07-27-2014, 03:53 PM
  #12  
ah53
Burning Brakes
 
ah53's Avatar
 
Member Since: Feb 2007
Location: Ho-Ho-Kus NJ
Posts: 1,031
Received 491 Likes on 176 Posts

Default

Originally Posted by Al T
I've got a better solution............. you take something like this



...... and do this to it.



There is definitely no worry of theft! It's been "safe" for nearly two years....
That was a very nice '64 Goat. I really hope you get it back on the road soon. It' so only 60 years old and way to young to be put to pasture
Old 07-28-2014, 06:51 PM
  #13  
Al T
Burning Brakes
 
Al T's Avatar
 
Member Since: Jan 2009
Location: Alberta/Missouri....... depending when.
Posts: 796
Received 30 Likes on 23 Posts

Default

Originally Posted by ah53
That was a very nice '64 Goat. I really hope you get it back on the road soon. It' so only 60 years old and way to young to be put to pasture
It will be. I bought the car out of Missouri in 2010. I drove it for a couple of years and ended up having to tear it apart to do a frame replacement. You can read about it here.

http://www.gtoforum.com/f50/1964-gto...acement-38688/

If there's interest in the resurrection I'll start a thread in the OT section here.

Allan

Get notified of new replies

To Anybody using a wheel clamp as an anti-theft device?




Quick Reply: Anybody using a wheel clamp as an anti-theft device?



All times are GMT -4. The time now is 12:37 AM.