C1 front suspension
#1
Safety Car
Thread Starter
Member Since: Apr 2013
Location: Arlington TX
Posts: 4,833
Received 929 Likes
on
531 Posts
2023 Restomod of the Year Finalist
2023 C1 of the Year Finalist - Unmodified
C1 front suspension
i've got a squeaky front end, so I assume I need to replace upper & lower bushings in the A frames or towers. Thought I'd start with the uppers first.
Is this something that can be done by an old worn out shade tree mechanic with no special tools?
Is this something that can be done by an old worn out shade tree mechanic with no special tools?
#3
Race Director
Member Since: Mar 2001
Location: Mustang OK
Posts: 13,852
Received 3,772 Likes
on
1,674 Posts
2023 C1 of the Year Finalist - Modified
2015 C1 of the Year Finalist
Nt,nokma,n.
Last edited by DZAUTO; 10-05-2013 at 05:44 AM.
#4
Team Owner
You're going to do a complete front end rebuild because of a squeak ?
Try lubing all 22 (24 lube points if you have Zerk fittings on the U-joints) first.
Hit the front fittings with the weight of the car ON the wheels and again with the weight off the wheels (e.g. wheels hanging free). You might just find your squeak is gone.
It worked on my car.
Try lubing all 22 (24 lube points if you have Zerk fittings on the U-joints) first.
Hit the front fittings with the weight of the car ON the wheels and again with the weight off the wheels (e.g. wheels hanging free). You might just find your squeak is gone.
It worked on my car.
#5
Safety Car
You're going to do a complete front end rebuild because of a squeak ?
Try lubing all 22 (24 lube points if you have Zerk fittings on the U-joints) first.
Hit the front fittings with the weight of the car ON the wheels and again with the weight off the wheels (e.g. wheels hanging free). You might just find your squeak is gone.
It worked on my car.
Try lubing all 22 (24 lube points if you have Zerk fittings on the U-joints) first.
Hit the front fittings with the weight of the car ON the wheels and again with the weight off the wheels (e.g. wheels hanging free). You might just find your squeak is gone.
It worked on my car.
I'll wager all of those 6 locations are very dry.
#6
Race Director
Member Since: Mar 2001
Location: Mustang OK
Posts: 13,852
Received 3,772 Likes
on
1,674 Posts
2023 C1 of the Year Finalist - Modified
2015 C1 of the Year Finalist
ALL of the above information is good. BUT, if ANY of the front suspension joints in a 53-62 Vette are squeaking, that means they are dry. Thus, that means they are now metal-to-metal. As a result, DEPENDING ON HOW LONG they have been squeaking and wearing, then is is quite possible some (or a lot) of slack in the joint(s) has occured. This slop will (or can) significantly effect alignment and result in poor handling.
#7
Race Director
Member Since: Nov 2000
Location: Beverly Hills (Pine Ridge) Florida
Posts: 10,152
Received 525 Likes
on
374 Posts
As a friendly reminder:
The Owner's Manual specifies greasing the front suspension (all 22 fittings) every 1000 miles.
And recommend you use a good quality EP grease with moly.
Plasticman
The Owner's Manual specifies greasing the front suspension (all 22 fittings) every 1000 miles.
And recommend you use a good quality EP grease with moly.
Plasticman