Fawndeuce

Hi,
I'm redoing the belts on my '62, and I was wondering if any of you guys could loan me the paper pattern that is available through one of the corvette vendors?
I tried to purchase the pattern from the vendor, but for reasons of total convolution too long to explain here, it would be near impossible for me to actually buy it from him.


Thanks,


Paul

Redbird

I don't have drawings, but have the original belts. Hard to take a good picture in the car.

Donald #31176

Hard to see but below the last square box w. X pattern are 2 horizontal lines.

Fawndeuce

Thanks for the pictures, mine didn't have the original webbing so I had nothing to work from.



Paul

62Jeff

Paul if you don't need it for a few days, I can take some close-up photos of mine, with a ruler in place to provide perspective.

Fawndeuce

No rush at all Jeff... if yours are original, a closeup or two with the stitching and a ruler in the shot would be great!
I think I had kept a thread from the NCRS giving total length, so I should be good on that.




Paul

62Jeff

Mine are NOT original. They are NOS webbing sewn one stitch at a time to align with Doc Rebuild's sewing pattern as of 1983.

Fawndeuce

That would be totally groovy Jeff.




Paul