Finally body meets frame again
#7
Pro
Thread Starter
Member Since: Oct 2006
Location: Bonheiden Belgium Europe
Posts: 585
Likes: 0
Received 0 Likes
on
0 Posts
This was already on the car when I bought it 5 years ago.
Except the wheels I replaced them, the old ones where aftermarket knock-offs.
I had the header ceramic coated on the outside only.
Dropped the ratio from the rearend from 3.55 to 3.36.
#8
Pro
Thread Starter
Member Since: Oct 2006
Location: Bonheiden Belgium Europe
Posts: 585
Likes: 0
Received 0 Likes
on
0 Posts
thx all for the compliments.
Getting the body to this stage was the hardest part of the restoration, took me 18 months.
Before she goes to the paintshop I still need to shim the body, hang and adjust the doors and hood
Getting the body to this stage was the hardest part of the restoration, took me 18 months.
Before she goes to the paintshop I still need to shim the body, hang and adjust the doors and hood
#15
Pro
Thread Starter
Member Since: Oct 2006
Location: Bonheiden Belgium Europe
Posts: 585
Likes: 0
Received 0 Likes
on
0 Posts
#16
Pro
Thread Starter
Member Since: Oct 2006
Location: Bonheiden Belgium Europe
Posts: 585
Likes: 0
Received 0 Likes
on
0 Posts