DRM Bilstein GB v6.0 (C5, C6 and C6z) Track, Auto-x and dual purpose cars
09-26-2014, 05:33 PM
#61
Former Vendor
Thread Starter
Shocks are here
:thu mbs:
Eating some dinner and getting ready to start putting them into sets. I will be sending out payment emails either tonight or tomorrow. The UPS guy was informed that he will be a busy boy on Monday
Thank you everyone for their patience during the delays and I hope you enjoy.
Thanks
Randy Rippie
336-350-8256 (Sunday I planned on putting in a 8-12 hour day if you need to get a hold of me)
:thu mbs:Eating some dinner and getting ready to start putting them into sets. I will be sending out payment emails either tonight or tomorrow. The UPS guy was informed that he will be a busy boy on Monday
Thank you everyone for their patience during the delays and I hope you enjoy.
Thanks
Randy Rippie
336-350-8256 (Sunday I planned on putting in a 8-12 hour day if you need to get a hold of me)
10-03-2014, 07:18 AM
#65
I was able to score a set of mildly used DRM valved Bilsteins. What a difference! The car has been totally transformed. Was using C6 Z06 shocks on my 2003 Coupe and oversteer was an understatement (pun intended). Now the back end is planted and I can actually power out of corners.
10-11-2014, 03:33 PM
#66
Le Mans Master
Im sorry I missed out on this!!
10-12-2014, 09:41 AM
#69
Pro
I would definitely like a set or two of Bilsteins.
Are there plans for version 7.0?
Personally I have had really bad luck with SA Konis on my Camaro. All 4 of the most recent set I bought have leaked and no, the car was not bottoming out. Finding a pool of oil under a front wheel in the middle of a track day is really disappointing. I had to keep another set (rebuilt) available at all times but considering that the front was basically a strut type design, this was a real PITA. I had used Konis in the past with great success but recently, not so much.
Are there plans for version 7.0?
Personally I have had really bad luck with SA Konis on my Camaro. All 4 of the most recent set I bought have leaked and no, the car was not bottoming out. Finding a pool of oil under a front wheel in the middle of a track day is really disappointing. I had to keep another set (rebuilt) available at all times but considering that the front was basically a strut type design, this was a real PITA. I had used Konis in the past with great success but recently, not so much.
10-12-2014, 12:35 PM
#70
That's very good to know...
Maybe when he ships the new ones out we can save on shipping by combining and have enough left over to go for a beer and chat about our setups!
Maybe when he ships the new ones out we can save on shipping by combining and have enough left over to go for a beer and chat about our setups!
10-13-2014, 11:07 AM
#71
Pro
10-13-2014, 01:05 PM
#72
Former Vendor
Thread Starter
V7.0 has started on my end already
We placed the order with Bilstein on 7-31. I was waiting until v6.0 was complete and in the filing cabinet before opening the flood gates again
Got some R and R time in this past weekend, so expect a thread soon!!!
Randy
We placed the order with Bilstein on 7-31. I was waiting until v6.0 was complete and in the filing cabinet before opening the flood gates againGot some R and R time in this past weekend, so expect a thread soon!!!
Randy
10-15-2014, 01:16 PM
#73
Do you believe the kinks will be worked out with Bilstein this time around? I've been impatiently waiting for v7.0, almost bought a set of sports - stockers are getting on my nerves.
10-16-2014, 06:46 PM
#77
Drifting
Checking twice a day for the new thread!
11-23-2014, 08:45 PM
#78
Intermediate
Member Since: Jul 2014
Location: Raleigh NC
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Unfortunately, I did not have my '03Z when this group buy deadline hit. Hopefully I can still get a set. My recently purchased Z is in need of new shocks. I'm also within 1 hour driving distance of Burlington.
11-24-2014, 03:47 PM
#80
Former Vendor
Thread Starter