LG bump steer kits, LG C5 3" mid pipes, exhaust pipes
#1
Former Vendor
Thread Starter
LG bump steer kits, LG C5 3" mid pipes, exhaust pipes
Stock photos, as always I sell what I say I have, over $150k in parts sold and hardly ever post pictures. Millions in sales all over the world for my RAAMaudio business.
--------------------
Front and Rear Bump Steer kits, LG, Great condition, fits C5 and C6
List price is $239 each.
You can have both kits for just $239 shipped, half off and free shipping
--------------------
LG Superpro header MIDSECTION ONLY, used for 3 sprint races, one test day, The ends neck down to 2.5". Not sure on the price so lets start at $239, OBO (no cats included)
--------------------
SOLD the pipes below
Custom fabricated over the axle and straight out the back, mandrel bend pipes, unknown brand, mild steel, for racing only. These came on the C5 race car, bolted up to the LG mid section I bought it but I added the small Summit mufflers like the ones Pfadt used on there race car(more like bullet style resonators).
$99 OBO
-------------------
See my add in the C6 section for these addtional parts.
SOLD Katech red billet tensioner
SOLD Hinson engine mounts
Goodrich SS brake lines for Z06/GS calipers
--------------------
PayPal preferred, ID is ram@raamaudio.com
All cards accepted if you must use one call me.
801-829-4997
Thanks, have a great weekend!
Rick
--------------------
Front and Rear Bump Steer kits, LG, Great condition, fits C5 and C6
List price is $239 each.
You can have both kits for just $239 shipped, half off and free shipping
--------------------
LG Superpro header MIDSECTION ONLY, used for 3 sprint races, one test day, The ends neck down to 2.5". Not sure on the price so lets start at $239, OBO (no cats included)
--------------------
SOLD the pipes below
Custom fabricated over the axle and straight out the back, mandrel bend pipes, unknown brand, mild steel, for racing only. These came on the C5 race car, bolted up to the LG mid section I bought it but I added the small Summit mufflers like the ones Pfadt used on there race car(more like bullet style resonators).
$99 OBO
-------------------
See my add in the C6 section for these addtional parts.
SOLD Katech red billet tensioner
SOLD Hinson engine mounts
Goodrich SS brake lines for Z06/GS calipers
--------------------
PayPal preferred, ID is ram@raamaudio.com
All cards accepted if you must use one call me.
801-829-4997
Thanks, have a great weekend!
Rick
Last edited by RAAMaudio; 07-10-2012 at 11:29 AM.
#3
Former Vendor
Thread Starter
Thanks Jay, email replied to, package deal offered as well on the LG mid and the exhaust pipes/mufflers
-------------------------
Lowered the price on the mid pipes and bump steer kits, I need these parts gone, funds are feeding a new race car build.
Thanks
Rick
-------------------------
Lowered the price on the mid pipes and bump steer kits, I need these parts gone, funds are feeding a new race car build.
Thanks
Rick
#5
Former Vendor
Thread Starter
Bump steer kits and mid pipes still available, make offers, especially on the mid pipes as I nee them out of the shop and doing some good somewhere
Over the axle pipes are sold and have been shipped.
Rick
Over the axle pipes are sold and have been shipped.
Rick
#10
What I have starts right after the merge collector, where it attaches before the X pipe. Includes X pipe and the rest of the way back to where the pipes end in the picture posted.
The merge collector is where all four pipes, per side, come together then neck down into a small diameter pipe and then expand back to 3", at the end of that expansion is where these start.
BUT, I will have to retrieve them from our storage facility to be doubly sure, just put them there recently to clear space while bending tubing for the roll cage.
Have a great evening!
Rick
The merge collector is where all four pipes, per side, come together then neck down into a small diameter pipe and then expand back to 3", at the end of that expansion is where these start.
BUT, I will have to retrieve them from our storage facility to be doubly sure, just put them there recently to clear space while bending tubing for the roll cage.
Have a great evening!
Rick
#11
Drifting
Ok, just checking. That center section is 3 bits, and wanted to be sure they're all the right stuff, you know? I also just lost my job yesterday. Interview tomorrow so we'll see how that goes. If I get it, and you still have the pipes I'll most likely buy.