Post your Race Parts 4 Sale HERE
03-22-2006, 08:59 PM
#1
Melting Slicks
Thread Starter
Post your Race Parts 4 Sale HERE
Feel free to post your Race Parts for Sale here AND , as usual, in the "parts for sale" section you would normally use for your generation...(cross reference)
Questions? PM me...
BTW - if you are unfamiliar with Forum FOR SALE guidelines - you can re-read them here...
http://forums.corvetteforum.com/show...6&forum_id=109
http://forums.corvetteforum.com/show...8&forum_id=109
Questions? PM me...
BTW - if you are unfamiliar with Forum FOR SALE guidelines - you can re-read them here...
http://forums.corvetteforum.com/show...6&forum_id=109
http://forums.corvetteforum.com/show...8&forum_id=109
Last edited by ERND IT; 12-04-2008 at 07:57 AM.
03-26-2006, 01:05 PM
#2
Le Mans Master
Out of date harness for sale (RCI), works well and looks great, just past it's date. THey are normally $150, I'll take $30 and you can get them rewebbed for cheap and still save $75. PM me
03-26-2006, 06:40 PM
#3
Le Mans Master
I need a transponder, anyone got one for sale?
03-30-2006, 01:33 PM
#5
Safety Car
SOLD!!!! 
DRM C5 Master Cylinder.
From DRM site -"DRM C5/C6 Modified Master Cylinder
This is a must for all enthusiasts with an upgraded brake system and it works good with any brake package, our AP setup, Willwood, Etc. For use with street or race setup. With this Modified Master Cylinder you'll get a bigger Master Cylinder that means that there is more brake fluid flow and a upgraded brake pedal feel. With this Master Cylinder the proportioning valve is added so you can control how much rear braking you want. That comes in handy at the racetrack. The DRM Modified Master Cylinder fits under stock location designed to clear the stock hood. If you are looking for maximum in braking performance this is the ticket."
http://www.dougrippie.com/drm/brake_...re%20Regulator
Bought it (used) last year from dmtnt -I've changed plans and never used.
$400 + shipping.
DRM C5 Master Cylinder.
From DRM site -"DRM C5/C6 Modified Master Cylinder
This is a must for all enthusiasts with an upgraded brake system and it works good with any brake package, our AP setup, Willwood, Etc. For use with street or race setup. With this Modified Master Cylinder you'll get a bigger Master Cylinder that means that there is more brake fluid flow and a upgraded brake pedal feel. With this Master Cylinder the proportioning valve is added so you can control how much rear braking you want. That comes in handy at the racetrack. The DRM Modified Master Cylinder fits under stock location designed to clear the stock hood. If you are looking for maximum in braking performance this is the ticket."
http://www.dougrippie.com/drm/brake_...re%20Regulator
Bought it (used) last year from dmtnt -I've changed plans and never used.
$400 + shipping.
Last edited by Bink; 05-27-2006 at 11:23 AM.
04-04-2006, 12:10 PM
#6
Melting Slicks
Member Since: May 2002
Location: Tucson Az
Posts: 3,424
Likes: 0
Received 1 Like
on
1 Post
St. Jude Contributor
383 stroker, D44 /w 410's etc. etc.
Anyone looking for a new 383 stroker?
How 'bout a newly re-built (zero miles) D44 with Dana 410 gear set?
Or a newly re-built 700r4 on steroids? That and much much more.
$8,500 buys it all. Check it out.
http://forums.corvetteforum.com/show...12&forum_id=54
How 'bout a newly re-built (zero miles) D44 with Dana 410 gear set?
Or a newly re-built 700r4 on steroids? That and much much more.
$8,500 buys it all. Check it out.
http://forums.corvetteforum.com/show...12&forum_id=54
04-05-2006, 09:45 PM
#8
Safety Car
Member Since: Jun 2005
Location: DFW This user does not support or recommend the product or service displayed in the ad to the right
Posts: 3,989
Likes: 0
Received 3 Likes
on
3 Posts
Used DRM brake ducts for a C5 or C6. Has modified factory C6 ducts pop riveted to the end to work with a C6. If you inted to use on a C5 you can simply remove the additional ducting. The flexible ducting that goes to your spindle has been worn through so you will probably need to replace. Less than a month old.
***********************SOLD************* **************************************** *********************
***********************SOLD************* **************************************** *********************
Last edited by C6400hp; 04-12-2006 at 02:40 AM.
04-10-2006, 08:21 PM
#10
Racer
Member Since: Dec 2004
Location: Charlotte NC
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
FS:18x11 CCW track wheels and Goodyear race slicks
http://forums.corvetteforum.com/show...post1554822348
wheels used 5 weekends
Tires are take-offs from a Daytona Prototype from this year's Daytona 24 - have between 1 and 3 heat cycles - Goodyear G19 475 compound - fit great on the CCW's
Located near Charlotte, NC
mstam55@hotmail.com
*****SOLD*****
wheels used 5 weekends
Tires are take-offs from a Daytona Prototype from this year's Daytona 24 - have between 1 and 3 heat cycles - Goodyear G19 475 compound - fit great on the CCW's
Located near Charlotte, NC
mstam55@hotmail.com
*****SOLD*****
Last edited by Ag-z06; 05-28-2006 at 05:27 PM.
04-11-2006, 04:49 AM
#11
R3 B Head and Neck restraint
From the Engineer that invented the Hutchens Device®, comes the most advanced carbon restraint yet. The R3 passed the most comprehensive and brutal SFI spec. ever written. The R3 is a revolutionary new concept in head and neck restraint systems. The R3 solves issues with current carbon restraints. The R3 head and neck restraint travels with the occupant during a crash to help keep the relationship of the head, neck and torso consistent.
The R3 is a state of the art Carbon Fiber Head and Neck Restraint System certified SFI 38.1 and tested at 70G. Years of development and hundreds of sled test’s have made the R3 a Comfortable, Effective, Multiple Impact capable Head and Neck Restraint System. Size Large for chest measurements 42-48. This unit has been used for fitting only and has not been racing yet. New cost is over $1000 delivered. On sale for $785 shipped to anywhere in the continental US. Please e-mail me with any questions drd@bewired.com
Thanks
Jeff
The R3 is a state of the art Carbon Fiber Head and Neck Restraint System certified SFI 38.1 and tested at 70G. Years of development and hundreds of sled test’s have made the R3 a Comfortable, Effective, Multiple Impact capable Head and Neck Restraint System. Size Large for chest measurements 42-48. This unit has been used for fitting only and has not been racing yet. New cost is over $1000 delivered. On sale for $785 shipped to anywhere in the continental US. Please e-mail me with any questions drd@bewired.com
Thanks
Jeff
04-11-2006, 11:20 PM
#13
Safety Car
Member Since: Jun 2005
Location: DFW This user does not support or recommend the product or service displayed in the ad to the right
Posts: 3,989
Likes: 0
Received 3 Likes
on
3 Posts
Originally Posted by C5ontrack
why are you selling these ducts? I couldn't make them fit my C6
05-03-2006, 08:09 PM
#15
Drifting
Big Azz mirror
Panaromic mirror See everyone behind you.
$35.00 Shipped
Clamps on you mirror Paypal or Money order
17" wide
$35.00 Shipped
Clamps on you mirror Paypal or Money order
17" wide
Last edited by TmillerC5; 05-03-2006 at 08:11 PM.
05-10-2006, 04:11 PM
#17
Pro
Member Since: Jun 2003
Location: Keller TX
Posts: 578
Likes: 0
Received 0 Likes
on
0 Posts
T1 shocks and springs
Used T1 shocks and springs. Got them 2 years ago from LG Motorsports in Dallas. Combined with T1 bars and slicks my 98 stock vert could run circles around Z06's with slicks on the road course. Asking $950 plus shipping firm. On GM Parts direct they are $1900 plus shipping new. email david.cheese@sbcglobal.net
Last edited by davidcheese; 05-10-2006 at 04:13 PM.
05-12-2006, 02:00 PM
#18
Racer
Member Since: May 2005
Location: Lodi NJ
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
L98 Corvette A/C eliminator bracket
