FS: AutoBlip
#1
Instructor
Thread Starter
AutoBlip
For sale is my AutoBlip. I cut the sheathing because the ground on my OBD2 was causing this unit to act up. I routed the ground through the dash to the passenger footwell where I grounded using a ring terminal. I can include some spares if needed. I replaced the ground end w/ a quick disconnect. I bought this BNIB from previous owner.
Comes with:
-Autoblip unit
-2 wire extensions from autoblip
-New T-Taps
-Extra quick disconnects
-Autoblip box.
-A few ring terminals incase you have the same issue I did
Price shipped: 300
Comes with:
-Autoblip unit
-2 wire extensions from autoblip
-New T-Taps
-Extra quick disconnects
-Autoblip box.
-A few ring terminals incase you have the same issue I did
Price shipped: 300
#4
Instructor
I know off-topic, but could you share what were the symptoms that led you to identify a grounding issue? Thx!
TomF
TomF
Last edited by RX82Z06; 09-28-2021 at 04:21 PM.
The following users liked this post:
RX82Z06 (09-29-2021)