FS: F/S or trade Road race 2003 Z06 540 RWHP
#1
Pro
Thread Starter
SOLD Road race 2003 Z06 540 RWHP
SOLD
So if you ever thought about preparing your Z06 with the right stuff to go fast, brake hard And be safe. Here’s your chance to acquire a well prepared Z06.
The Vette is capable of 1:15 at Summit Point and Sub 2:00 at VIR
Title in hand, never wrecked, 9000 original miles.
Over $38K + invested not including labor or the price of the Z06.
Asking $38K or trade for a C6 Z06. Possibly additional cash depending on what you have.
Reason for selling: Just do not have the time to run the car. This vette has been used for NASA TT-1 and is in excellent condition.
PM me if interested or would like additional information.
- Tuned by the premiere tuner Ed Hutching
- 540 RWHP New Schwanke Racing engine Forged LS 415 Short block $6000.00
- Cartek Stage 5 243 heads $1500.00
- Wilson Intake Manifold/90 MM Throttle body $900.00
- Full ARE 4 stage dry sump oil system (3 scavenge, 1 pressure) $3000.00
- Two oil coolers one after scavenge and one on the pressure side
- RPM TR6060 ZR-1 w/Pump, Transmission custom splined for the C5 $5800.00
- 3:73 Rear (zero miles) built by RKT Trans $1100.00
- QuarterMaster Clutch $1600.00
- Piper Motor Sport NASA certified Cage $5000.00
- Sparco removable Steering wheel
- Kooks 1 7/8 headers/3 inch X pipe $1000.00 (also have the 3 inch Cat X Pipe)
- Stoptech Front 6-Piston Brakes $2500.00
- Rod Davis Radiator $900.00
- DRM Rear diff cooler $600.00
- Sparco Evo racing seats and G-Force 5 point harness $1000.00 both current
- SPA 5 lbs fire suppression with 6 spray nozzles $400.00
- ACP Front Splitter and Carbon Fiber “Laguna” undertray $1800.00
- Frame mounted Fulcrum/AJ Hartman Rear Carbon Fiber wing $1600.00
- CCW 18x11.5 fronts and 18x12 rears $3000.00
- Brand new Michelins 18 inch Racing slicks $2500.00
- Doug Rippie Motorsports (DRM) Custom Bilstein Coil over shocks with Hyper coil springs
- T-1 anti-sway bars, Poly bushings on the control arms
- Custom Vented hood
So if you ever thought about preparing your Z06 with the right stuff to go fast, brake hard And be safe. Here’s your chance to acquire a well prepared Z06.
The Vette is capable of 1:15 at Summit Point and Sub 2:00 at VIR
Title in hand, never wrecked, 9000 original miles.
Over $38K + invested not including labor or the price of the Z06.
Asking $38K or trade for a C6 Z06. Possibly additional cash depending on what you have.
Reason for selling: Just do not have the time to run the car. This vette has been used for NASA TT-1 and is in excellent condition.
PM me if interested or would like additional information.
- Tuned by the premiere tuner Ed Hutching
- 540 RWHP New Schwanke Racing engine Forged LS 415 Short block $6000.00
- Cartek Stage 5 243 heads $1500.00
- Wilson Intake Manifold/90 MM Throttle body $900.00
- Full ARE 4 stage dry sump oil system (3 scavenge, 1 pressure) $3000.00
- Two oil coolers one after scavenge and one on the pressure side
- RPM TR6060 ZR-1 w/Pump, Transmission custom splined for the C5 $5800.00
- 3:73 Rear (zero miles) built by RKT Trans $1100.00
- QuarterMaster Clutch $1600.00
- Piper Motor Sport NASA certified Cage $5000.00
- Sparco removable Steering wheel
- Kooks 1 7/8 headers/3 inch X pipe $1000.00 (also have the 3 inch Cat X Pipe)
- Stoptech Front 6-Piston Brakes $2500.00
- Rod Davis Radiator $900.00
- DRM Rear diff cooler $600.00
- Sparco Evo racing seats and G-Force 5 point harness $1000.00 both current
- SPA 5 lbs fire suppression with 6 spray nozzles $400.00
- ACP Front Splitter and Carbon Fiber “Laguna” undertray $1800.00
- Frame mounted Fulcrum/AJ Hartman Rear Carbon Fiber wing $1600.00
- CCW 18x11.5 fronts and 18x12 rears $3000.00
- Brand new Michelins 18 inch Racing slicks $2500.00
- Doug Rippie Motorsports (DRM) Custom Bilstein Coil over shocks with Hyper coil springs
- T-1 anti-sway bars, Poly bushings on the control arms
- Custom Vented hood
Last edited by Woods; 03-01-2015 at 11:04 PM. Reason: Sold
#4
Pro
Thread Starter
Yes, it has a full cage certified by NASA. The cage was built by Piper Motorsports which is one of the premier cage builders on the east coast.
I will try and get some pics of the cage uploaded.
I will try and get some pics of the cage uploaded.
Last edited by Woods; 01-11-2015 at 07:48 PM.
#6
"AlohaC5" Senior Member
Mike, GLWS!
Everyone, this car is 100% sorted out and prepped for the road courses. A true "turn key" car!
You could not buy and build this complete and high quality of a C5 race car for twice the price.
I'm confident you will find the right buyer; especially as the HPDE/TT season draws near. Mike
Everyone, this car is 100% sorted out and prepped for the road courses. A true "turn key" car!
You could not buy and build this complete and high quality of a C5 race car for twice the price.
I'm confident you will find the right buyer; especially as the HPDE/TT season draws near. Mike
#11
Last Man Standing
The is the last of the 3 best race buddies to make the decision to step out of the saddle. I think it's only fitting that you are the end of the line as you were the last to jump into the deep end with us. Probably the smartest as you received the greatest benefit from watching those before you build their cars, only to show up with a one-up after everyone had shown their hands.
What a great car to pass along to the next guy, only but the best was put into this one. How do I know, cause every great idea I came up with seemed to show up on this car... To anyone seriously interested in Mike's car, have not doubt this is a fantastic deal.
I hope that the right buyer comes along, who can truly appreciate all the that you've done to make this one so quick yet totally turn-key, reliable!
What great memories we have made!
Good luck and once you sell her, let me know as I have a crying towel you can borrow...still a little damp after letting mine go.
What a great car to pass along to the next guy, only but the best was put into this one. How do I know, cause every great idea I came up with seemed to show up on this car... To anyone seriously interested in Mike's car, have not doubt this is a fantastic deal.
I hope that the right buyer comes along, who can truly appreciate all the that you've done to make this one so quick yet totally turn-key, reliable!
What great memories we have made!
Good luck and once you sell her, let me know as I have a crying towel you can borrow...still a little damp after letting mine go.
#13
******RETIRED ARMY******
Member Since: Jun 2009
Location: VA
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '12
What a great car to pass along to the next guy, only but the best was put into this one. This is a true turn key car that has been meticulously maintained. Always hand washed and cleaned after every weekend inside and out. The underneath is as clean as the outside and the engine bay is spotless.
This Vette has the best of everything from the fluids to the parts on the vehicle. The most reliable Vette I have seen on the track.
The hours spent on getting this Vette right couldn't be counted and have a price put against them. The engineering and time spent would cost someone else twice as much if they were doing it from a fresh build. Well worth the asking price.
I have watched this car at the track and have been amazed with the performance of the car and driver. If anyone is wondering about the performance look this car up on the UTCC stats and you will see it took second place in class.
Mike good luck with the sell and you will truly be missed at the track. I have learned a lot from being around you off and on the track.
This Vette has the best of everything from the fluids to the parts on the vehicle. The most reliable Vette I have seen on the track.
The hours spent on getting this Vette right couldn't be counted and have a price put against them. The engineering and time spent would cost someone else twice as much if they were doing it from a fresh build. Well worth the asking price.
I have watched this car at the track and have been amazed with the performance of the car and driver. If anyone is wondering about the performance look this car up on the UTCC stats and you will see it took second place in class.
Mike good luck with the sell and you will truly be missed at the track. I have learned a lot from being around you off and on the track.
#14
Pro
Thread Starter
Thanks Mike, Chuck and Ron.
I will miss this one the most. I've been doing this stuff for 20+ years and know what works and what doesn't. This is vette is Fast, Safe and Reliable.
I will miss this one the most. I've been doing this stuff for 20+ years and know what works and what doesn't. This is vette is Fast, Safe and Reliable.
#15
#17
Pro
Thread Starter
Plenty of interest.....but still available
C5 Z06, C6 Z06 and C6 Grand Sports considered for trades
C5 Z06, C6 Z06 and C6 Grand Sports considered for trades
Last edited by Woods; 01-11-2015 at 08:41 PM.
#18
Instructor
Member Since: Feb 2000
Location: hamilton,va.
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
the three amigos
the last of three amigos hanging up the driving gloves. I really want to say to anyone considering buying a track/race car you owe it to yourself to give this car a serious look. Having been one of the three mentioned in the title I can say without any reservation that this car is extremely well prepared and sorted. Clean, fresh however you want to put it. But whats really important is that ITS FRICKEN FAST!! I have shed a tear or two when I sold my car and now Chuck,s is gone and now Mikes is on the block. Great times, great friends. This car is an absolute bargain!! Somebody needs to jump on this deal!
#19
Pro
Thread Starter
Sold
Vehicle has been sold to a young man on the east coast. I had a few offers but I truly believe he's the right guy for the car. He has raced Honda's and is stepping up into a big horsepower vette.
Congrats
Congrats
Last edited by Woods; 01-17-2015 at 12:25 PM.
#20
Racer
I bought the car yesterday. It's a well though out well prepared car from a real enthusiast. Wish I had more time to get educated about vettes from him. 😀 can't wait to get it to the track!