FS: AP Racing T1 Calipers (CP8350)
08-22-2013, 09:43 PM
#1
Melting Slicks
Thread Starter
AP Racing T1 Calipers (CP8350)
SOLD. Thanks to everyone who responded. SOLD.
Want to sell one pair of used CP8350 calipers. I bought them a few months after Gary (Hardbar) and Essex came up with the setup. The mounting brackets and hardware are included, but no rotors. I will also include my CL RC6 race pads that have about half the pad material remaining (that tells you how much the calipers have been used, not much, about 9 track days).
This pair of calipers was on the rear of my Mosler, so they are set up as "leading" calipers - for use on the front of a Vette they will need to be set up as "trailing". To do this you simply swap the positions of the bleeders and the steel crossover lines.
I will sell both calipers, the brackets and the used pads for $800, shipped in the continental US. I would prefer PayPal but a check or money order from a forum member should be fine as well.
SOLD.
Want to sell one pair of used CP8350 calipers. I bought them a few months after Gary (Hardbar) and Essex came up with the setup. The mounting brackets and hardware are included, but no rotors. I will also include my CL RC6 race pads that have about half the pad material remaining (that tells you how much the calipers have been used, not much, about 9 track days).
This pair of calipers was on the rear of my Mosler, so they are set up as "leading" calipers - for use on the front of a Vette they will need to be set up as "trailing". To do this you simply swap the positions of the bleeders and the steel crossover lines.
I will sell both calipers, the brackets and the used pads for $800, shipped in the continental US. I would prefer PayPal but a check or money order from a forum member should be fine as well.
SOLD.
Last edited by Everett Ogilvie; 08-23-2013 at 01:15 PM.
08-23-2013, 11:11 AM
#4
Melting Slicks
Thread Starter