Need schematic to make my own harness for a cd changer in aC5
#1
Advanced
Thread Starter
Member Since: Sep 2002
Location: fremont ca
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Need schematic to make my own harness for a cd changer in aC5
Hi I would like to make my own harness for a cd changer. Does anyone have a schematic ?
spencer
spencer
#2
Melting Slicks
Member Since: Sep 2000
Location: Satellite Beach, FL, USA
Posts: 2,756
Likes: 0
Received 3 Likes
on
3 Posts
Re: Need schematic to make my own harness for a cd changer in aC5 (slxrti)
On the back of the Bose HU:
C1/C2 Siamese connector
C2(15) E&C data buss
C2(11) L input
C2(12) R input
C2(13) Audio return
You must then connect the CD changer to power and ground. If your changer has a Drain or Shield wire, connect it only to the changer chassis.
C1/C2 Siamese connector
C2(15) E&C data buss
C2(11) L input
C2(12) R input
C2(13) Audio return
You must then connect the CD changer to power and ground. If your changer has a Drain or Shield wire, connect it only to the changer chassis.