New AVIC D3 has no sound

[jackp]

I had a Pioneer AVIC D3 installed yesterday in my onstar 2007 and it worked fine for 24 hours. n Now all the visuals(radio,iPod,DVD, CD, Navigation, phone) are working perfectly but no sound is coming out of the Bose speakers. I can see the music playing on the screen but cannot hear it. I had a professional install : Bluetooth kit Scosche MDA1B, GM 1595B DCGMOS2B11 PAL Steering wheel connection iPod connection cabe I also had a rear camera RL26 but it would not work. Any ideas?

[pentavolvo]

sounds like a losse connection causing factory amp to not turn on, bring it back to the installer

[maw455]

I'm considering upgrading my NAV to an aftermarket unit to have a more seamless integration of phone bluetooth and iPod. What is your impression of the D3's bluetooth and iPod features and where did you get it installed?

[pentavolvo]

ive never used bluetooth on the d3 but the ipod is great on it

[Z51C6er]

Check the blue wire with the white stripe from the Avic D-3.
That is the wire that turns on the amplifier.

It could be that the wire became disconnected.
I'm not familiar with the Scoshe harness interface.
If there is a blue wire with the white stripe on the Scoshe, it needs to be reconnected. Otherwise the wire may have to be connected to the power antenna wire on the car harness side.

What I would do first is simply look to see if the blue wire with the white stripe is actually connected.

Good luck,
Doug