Thanks for the input guys here is my system. Pics coming soon.

Year: 2004 Model: Convertible Head Unit: Pioneer AVIC - D3 Processor: Alpine RUX-C701 Controller for 07 Alpine PXA-H701 Car Audio EQ DSP DTS Signal Processor Front Speakers:4 Polk 1" Dome Tweeters, 2 Polk 8" 4 ohm Subwoofers, 2Polk 3 1/2" Rear Speakers: Polk 5 1/4 Component System Sub (s): 2 Rockford Fosgates 10" Dual Shallow 4 ohm Subs Amplifier (s): 1 Rockford Fosgate Punch 5002 2 channel, 1 Rockford Fosgate Punch 4002 4 Channel Car PC: N/A Sound deadening: B-Quiet Extreme Wires: Not sure Other: Box: Sub Thump Dual Flush Enclosure System Cost:$2500 Install Cost:Luckily my best friend does this so maybe a beer.. If anyone has any ideas to add on or has worked with any of this equipment before then I welcome all advice. The tweeter will be mounted in the door pulls and the a pillars. The amp rack will be custom built and a local embroidery shop is going to do some custom work in the trunk so it should look pretty good when they get done. I will add pics as I go along. I will be starting as soon as all of the stuff arrives.. Thanks again

[Kale]

tweeters in door pulls cause some serious side bias issues. Stick with the pillars.

[fej]

I would shy away from 4 tweets as well and if you do go with the pillar location as close to cross firing as you can get without any interference from the dash. Rest looks pretty solid.

G'luck
Fej

[undertaker]

c'mon be a nice friend.......you're only gonna give the installer buddy a beer? I think it calls for at least a case