amp by pass...

[jesse12804]

Is /are AMP BYPASS'S needed when installing aftermarket radios in a c6 with BOSE??I think BOSE SPEAKERS have/had individaul amps for each speaker,right??

[_Nomad_]

Originally Posted by jesse12804

Is /are AMP BYPASS'S needed when installing aftermarket radios in a c6 with BOSE??I think BOSE SPEAKERS have/had individaul amps for each speaker,right??

The Blose units in the C6 have only one amp located in the passenger side foot-well next to the fuse box. If you want to install an aftermarket HU while keeping the Blose speakers you will need some converters. Like the Peripheral GMAH24 and the GMAHCM, or the PAC AOEM-GM24. However, why anyone would want to keep the Blose speakers and amp is beyond me since THAT is the weak link of the Blose system, not the HU. You will be better off replacing the whole damn thing...at least IMO.

[jesse12804]

The Blose units in the C6 have only one amp located in the passenger side foot-well next to the fuse box. If you want to install an aftermarket HU while keeping the Blose speakers you will need some converters. Like the Peripheral GMAH24 and the GMAHCM, or the PAC AOEM-GM24. However, why anyone would want to keep the Blose speakers and amp is beyond me since THAT is the weak link of the Blose system, not the HU. You will be better off replacing the whole damn thing...at least IMO.
_Nomad_

Well,as always,money is a factor! So,would you reccomend changing out the speakers instead??

[pentavolvo]

unless you plan on amping them and adding a sub etc u might be better off sticking with the stockers

[jesse12804]

unless you plan on amping them and adding a sub etc u might be better off sticking with the stockers

Not doing all that.So,Just 1 by pass for one speaker amp will do the trick for stock speakers?