1996 Corvette Radio Bulbs Out

89'Bowtie · 04-24-2005, 02:31 PM

Looks like I have two bulbs out in the radio unit. Has anyone replaced these bulbs. It requires un-soldering the old bulbs from the PCB board and re-soldering the new ones in.

Anyone do this? If so, does GM list the bulbs as seperate bulb service numbers? Any feedback is great.

Thanks,
Vic

yellowlust · 04-24-2005, 02:34 PM

There is a Tech Tip on this. Tells you everything.

I'll being doing this soon too.

ALLT4 · 04-24-2005, 02:36 PM

I just did mine the other day, the directions are all you need. You do have to do some soldering.

http://www.corvetteforum.com/techtip...=249&TopicID=2

Darkmke · 04-24-2005, 08:33 PM

I did mine last spring. The tech tip has all the needed info. I went ahead and replaced all the bulbs while I had it apart so I didn't have to do it all again soon. I took the time and cleaned the buttons on the AC/heater controls while I had everything apart.