Ignition Module
11-05-2002, 08:09 PM
#1
Intermediate
Thread Starter
Member Since: Mar 2001
Location: Houston TX
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Ignition Module
Has anyone replaced their ignition module that is located just behind the ignition coil? The module looks like other ignition modules, it is black with a white dot in the center and 4 pins at the top for the pigtail. It is located on the same plate as the coil. I can't find any aftermarket modules. I would rather go with an aftermarket module other than stock. Does anyone have any ideas?
1993 LT-1, 6speed, MSD "blaster coil", Magnecor plugwires, torquemaster plugs, AMSOIL
Top Speed so far 165....
[Modified by hotdawg1, 11:44 PM 11/5/2002]
1993 LT-1, 6speed, MSD "blaster coil", Magnecor plugwires, torquemaster plugs, AMSOIL
Top Speed so far 165....
[Modified by hotdawg1, 11:44 PM 11/5/2002]
11-06-2002, 12:35 AM
#2
Race Director
Member Since: Aug 2002
Location: tucson AZ
Posts: 13,356
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '04 & '05
Re: Ignition Module (hotdawg1)
You've got the MSD already...now install an MSD coil in the HEI...Then install an dyna Mod Module.....then you will have a complete updated HEI distributor....you will be HAPPY...HAPPY...HAPPY....
:rolleyes: :rolleyes: :rolleyes: :rolleyes: :rolleyes:
:rolleyes: :rolleyes: :rolleyes: :rolleyes: :rolleyes:
11-06-2002, 01:02 PM
#3
Racer
Member Since: Feb 2002
Location: Fraser MI
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
Re: Ignition Module (oldace84)
You've got the MSD already...now install an MSD coil in the HEI...Then install an dyna Mod Module.....then you will have a complete updated HEI distributor....you will be HAPPY...HAPPY...HAPPY....
:rolleyes: :rolleyes: :rolleyes: :rolleyes: :rolleyes:
:rolleyes: :rolleyes: :rolleyes: :rolleyes: :rolleyes:
11-06-2002, 03:52 PM
#4
Intermediate
Thread Starter
Member Since: Mar 2001
Location: Houston TX
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Re: Ignition Module (konroh)
konroh is right, I have an LT-1, so I do not have the setup oldace84 is talking about. I have the optispark. I emailed summit and Holley and they do not carry any ignition modules for my setup and do not know where to get any. Does anyone have any ideas?
1993 LT-1, 6speed, MSD "blaster coil", Magnecor plugwires, torquemaster plugs, AMSOIL lube&filters
daily driver
Top Speed so far 165....
:confused:
1993 LT-1, 6speed, MSD "blaster coil", Magnecor plugwires, torquemaster plugs, AMSOIL lube&filters
daily driver
Top Speed so far 165....
:confused:
11-07-2002, 02:51 PM
#6
Racer
Member Since: Feb 2002
Location: In
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
Re: Ignition Module (hotdawg1)
I put one on a friends 93 and picked it up from an acdelco dealer. They had it instock. If you are looking for some kind of performance upgrade, I am not familiar with any. Maybe someone else here has seen such a product
good luck, david
good luck, david
11-07-2002, 08:17 PM
#7
Re: Ignition Module (hotdawg1)
Why not use the OEM type? I don't think the ICM is a performance upgradable area of the ignition system-- it either does it thing or it doesn't.
P.S. be sure to use heat sink compound between the aluminum heat sink (that the ICM and Coil are mounted to) and the back of the ICM :yesnod:
[Modified by Lone Ranger, 6:19 PM 11/7/2002]
P.S. be sure to use heat sink compound between the aluminum heat sink (that the ICM and Coil are mounted to) and the back of the ICM :yesnod:
[Modified by Lone Ranger, 6:19 PM 11/7/2002]
11-09-2002, 05:04 AM
#8
Le Mans Master
Re: Ignition Module (Lone Ranger)
Mine died, and I replaced it with one from Borg Warner. I believe they just repackaged the GM one. It had the same identical writing etc. as my origianal.
