How to cut a .500 light
05-30-2002, 01:18 PM
#1
Burning Brakes
Thread Starter
Member Since: Oct 2001
Location: Tracy California
Posts: 1,033
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '05
How to cut a .500 light
Does anyone have any technique they'd like to share? Wich yellow are you guys reacting to? How do you stage? does that have anything to do with it?
KM
KM
05-30-2002, 02:16 PM
#2
Team Owner
Re: How to cut a .500 light (88-406)
Per stage, Stage.
Close your eyes, count to 3, and launch.
Thats as good as any method.
You can't copy anyone here, just to many thing that control launch/ reaction time. You must fine what works best for you.
I know there are racers her like Beach, OD, Ralph, Panuzzo and myself that could talk for days on this topic and thats because we tried it all.
[Modified by mackeyred96, 1:17 PM 5/30/2002]
Close your eyes, count to 3, and launch.
Thats as good as any method.
You can't copy anyone here, just to many thing that control launch/ reaction time. You must fine what works best for you.
I know there are racers her like Beach, OD, Ralph, Panuzzo and myself that could talk for days on this topic and thats because we tried it all.
[Modified by mackeyred96, 1:17 PM 5/30/2002]
05-30-2002, 05:33 PM
#3
Team Owner
Member Since: Feb 2000
Location: Lithia FL
Posts: 32,545
Received 0 Likes
on
0 Posts
Cruise-In II & IV Veteran
CI VI Drag Champ!
Re: How to cut a .500 light (88-406)
Practice. However, trying to cut .500 is very dangerous. If you miss too early you will go red. i try to hit a .5teen light each time.
You have to experiment. Car, track and driver will make launches very different.
I have an A4. I load my converter to about 2000 and watch for 3rd yellow to come on. This is with a very shallow stage. If I do not load, I cut bad lights.
I have cut a few .50x lights recently but usually am a high teen to high 30 range
You have to experiment. Car, track and driver will make launches very different.
I have an A4. I load my converter to about 2000 and watch for 3rd yellow to come on. This is with a very shallow stage. If I do not load, I cut bad lights.
I have cut a few .50x lights recently but usually am a high teen to high 30 range
05-30-2002, 05:46 PM
#4
Le Mans Master
Re: How to cut a .500 light (REDGAR)
I normally launch from idle and stage shallow. On the 3rd yellow I smash the gas to the floor and usually wind up with a .52-.55.
05-30-2002, 07:25 PM
#5
Race Director
Re: How to cut a .500 light (Face)
It really depends on how your are seeing the lights on the tree, & how fast your car reacts to you mashing the gas..
Example if its a "BRIGHT SUNNY" day & I hit the gas as soon as the last yellow goes on I am around .540 - 560 however if its "NIGHT" racing & I hit the gas as soon as I see the last yellow I'll go RED..
The reason in the dark you see the filament of the bulb light much sooner than in the bright light...
Another thing is staging, if you light the bottom bulb, & accidently go in another 3-4" you reaction time will be quicker.. maybe TOO quick... :(
It's a science, & PRACTICE
Example if its a "BRIGHT SUNNY" day & I hit the gas as soon as the last yellow goes on I am around .540 - 560 however if its "NIGHT" racing & I hit the gas as soon as I see the last yellow I'll go RED..
The reason in the dark you see the filament of the bulb light much sooner than in the bright light...
Another thing is staging, if you light the bottom bulb, & accidently go in another 3-4" you reaction time will be quicker.. maybe TOO quick... :(
It's a science, & PRACTICE
05-30-2002, 10:13 PM
#6
Burning Brakes
Thread Starter
Member Since: Oct 2001
Location: Tracy California
Posts: 1,033
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '05
Re: How to cut a .500 light (88-406)
Hey, does everyone have an automatic or what ? Anyone with a manual care to comment on technique? I imagine there must be a difference.
KM
KM
05-30-2002, 10:16 PM
#7
Race Director
Member Since: Sep 2000
Location: The Top of Utah
Posts: 17,298
Likes: 0
Received 23 Likes
on
22 Posts
Re: How to cut a .500 light (Red96Coupe)
It's a science, & PRACTICE
Otherwise, you get .500 lights the same way you get to Carnegie Hall.
Good luck.
05-30-2002, 10:30 PM
#8
Team Owner
Re: How to cut a .500 light (88-406)
Then I raced my 4 SPD super stock chevelle. On the first yellow I bring the revs up to 9000 and on the last yellow side step the chutch and hold on.
Try that with your Vette, It would be a fun ride aleast once. ;)
Try that with your Vette, It would be a fun ride aleast once. ;)
05-30-2002, 10:36 PM
#9
Safety Car
Re: How to cut a .500 light (mackeyred96)
footbraking with no electronics its luck to hit a .500 regardless of who you are.... but its a lot of practice and some skill to consistently be right off that #.
When you figure it out... let me know, I could use the help. :)
cheers,
Beach Bum
When you figure it out... let me know, I could use the help. :)
cheers,
Beach Bum
05-30-2002, 11:03 PM
#10
Melting Slicks
Member Since: Mar 1999
Posts: 2,499
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to cut a .500 light (88-406)
Check out http://www.staginglight.com/guide/react.html This is a pretty good explanation of what is going on. :yesnod:
