T_Vert

Years ago I had this functioning properly and had it configured to illuminate a a given RPM. It seems to no longer work on the version of HPT I just downloaded (2.24). Furthermore If I go VCM controls and command the shift light on I get nothing. MIL and other functions work in the VCM controls window so I'm assuming one of two things is going on.

1. This function has been removed
2. My C.A.G.S light no longer works.

If #2 I don't see any way to actually test this light as when the ignition is turned on and the dash lights are illuminated the 1 to 4 shift C.A.G.S. light does not illuminate by default.


Any input/help is appreciated.

Dave

BIGGDADDYWIGGS

I sat mine to come on at 5800 RPM a few weeks ago, it would Illuminate when I revved it past 5800 RPM, but I haven"t noticed if it comes on anymore.

T_Vert

I don't think that'd make any difference unless you've upgrade to newer HPT and then flashed the tune. Any chance you could hook up your scanner and use VCM controls to command shift light on to see if that light illuminates?

Dave

T_Vert

Anyone have any info?

umrjmac

I do not have an answer, but I would post on their forum that their support staff monitors

T_Vert

EDIT, I have it on the HPT forum but no replies as of yet. It seems I rarely get replies there.
Dave

78GEN3

Tech 2 can test the light. Find someone that has one and verify your light is working.

T_Vert

There has to be another way especially w/ HPT to command this light. Nobody I know has a tech2 and I'm not going to pay the dealer to do this. So I guess I need HP tuners people to reply to me so I can see if this even works anymore.

78GEN3

I'd test mine out with 2.24 for you, but my trans is out right now.

T_Vert

Thanks for the offer. No reply from hpt yet either. Anyone have 2.24 who could go into their scanner and command shift light in vcm controls

thanks Dave

danieloneil01

2.24.369 and it works for me. My trans it out too

T_Vert

So if you Cubans shift light:on the cags light illuminates?

danieloneil01

I don't understand what you're asking. When I clicked "Shift Light" to ON the light for 1 -> 4 light came on.

T_Vert

When you open your HPT scanner and go into VMC controls and click Shift light ON. Does the CAGS (1 to 4 shift) light illuminate on the dash? What shift light came on for you? The shift light on the HUD? Sorry for last message my phone corrected what I was typing.
Dave

danieloneil01

1 -> 4 light came on on the dash. I did not look at the HUD.

T_Vert

Ahh thanks. My dash light must be out. Do you have your 1-4 shift light configured? If not, perhaps my config isn't allowing the light to illuminate when shift light is commanded on.
Dave

danieloneil01

It's tuned out.

T_Vert

I'll try to play w/ the tune to see if that affects the shift light on VCM control command.

Dave

danieloneil01

It shouldn't since it will force anything to enable/disable, turn on/off using the VCM controls even if it's turned off in the tune. Atleast that's how it works for me. v

T_Vert

I just tested again and I get no light. I must have a dead bulb.