Oil dipstick install
#2
Drifting
Member Since: May 2012
Location: Southport North Carolina
Posts: 1,618
Received 100 Likes
on
50 Posts
Had to have my wife spend 30 seconds in the garage on this... After I spent 10 minutes unsuccessfully trying to re install on my own.
#3
Safety Car
Put all the bolts in the manifold but leave the manifold loose.
Insert the tube into the pan, you will probably have to wiggle/bend/finesse the tube a bit to get it to fit.
If I remember it has to be bent forward slightly to fit, but it will go in. Once you have the tube installed in the pan tighten down the manifold and then finesse the tube to put the bolt in.
It's a one person job ......
Insert the tube into the pan, you will probably have to wiggle/bend/finesse the tube a bit to get it to fit.
If I remember it has to be bent forward slightly to fit, but it will go in. Once you have the tube installed in the pan tighten down the manifold and then finesse the tube to put the bolt in.
It's a one person job ......