Matt Cyber Z06

We see how many Are having issues--
But let's compare to how many are Not !

Please Vote and share your Year and Mileage

Thanks

'06 Quicksilver Z06

Good idea for a thread.

2006 23,000 miles, WCCH heads, solid stemmed SS valves bronze valve guides,

No valve issues.

Matt Cyber Z06

I guess I did not make it clear enough
(Engines that are Not having issues *stock)

'06 Quicksilver Z06

Oh. OK. You didn't say "stock".

Well then you might want to have the moderators close this thread and start another one.

If not, well then people like myself will probably vote in it and make the results look better than they actually are.

Good luck.

Matt Cyber Z06

If the Mods would like to take the Idea of this Thread and turn it into
more User friendly wording and Info, That would be Great!

2019 ZR1

I would like to think everyone would have enough sense to know you meant a stock Z06. But god forbid I say anything else because I might get banned. Mine is a 2013 with 7800 miles. It runs great!!! I'm having a really hard time deciding if I should put a Edelbrock supercharger on.. WHAT DO YOU GUYS THINK..

RFZ

stil running stock heads at 41k. runs great

PatriotZ

Matt good idea and I also would like to think people know exactly what you are talking about.....08 stock 35,000+ miles....so far so good

owc6

I was almost afraid to vote. Mine seems OK right now. Not making any untoward noises.

Early '09 model year that I bought in mid '10 new. Almost 70,000 mi. (I'm too lazy to go look, but close). Stock, except B&B Bullets (which, I'm sure you weren't even addressing this kind of mod)


lisa

propain

2008 14K miles. Inspected. No issues yet.


Funny how someone tried to sneak in and tally 23K miles on SS valves with no issues when in reality its more like "1500 miles no issues yet on the SS valve modification"

bigcat29

Mine has 10k miles on it. She leaks down between 1 to 3 percent ice cold with 100psi applied. My engine guy tells me a lot of LS7 valve failures are a result of valve float. Upgrade the valve springs and rockers to avoid problems.

BadboyZ06

2006, 27,722. Completely stock engine only the tires were changed. No wiggle test has been performed and this car has no valve train noise like I have seen posted by some on the forum. It runs as strong as it did the day I took delivery. Its not a daily driver and I have multiple cars like many forum members, but so far so good no issues not even a single fluid leak.

Oleman

09 42k miles all okay so far. I am still in warranty but have already talked to dealer about checking and will do after holidays..........

two-piece

08 16,500 not checked but running great.

cruzr6

06 w/31k miles, 2nd owner, purchased @ 8.1k miles. basically stock except corsas. production # near the end of 06 run. had stems (top, middle, and bottom) measured and guides ... very little wear and nobody out more than 15%. chevy service rep was real interested in test ... watched as sr mech performed tests, and another tech watched. bill: $350 which included new plugs. i'm a happy camper.

merry christmas everyone.
.

zcarbon

Saturday, I C the Fix vendors are already in $$
Sorry Matt

olddragger

I have an 08, 45k miles. It's stock and no problems. It is a Daily driver

phipp85

2011 with 27K miles. All stock. Will be checking after Christmas.

dovervold

07, 20K miles, Torquer 110 cam, LT's, ect... Hasn't skipped a beat. This Spring will be doing WCCH stage II ported and shaved heads, will report on valve specs when we pull th heads. Cheers,

ioutrun

Got WCCH heads at 38xxx miles (2008 C6Z)..all valve guides were within spec before head porting/milling!