0corvettemods1

As many of you know, you risk damaging your Corvette when you or a shop tries to lift it without have proper jack pads in place. Why take the risk of getting your prized possesion back with damaged rockers?

Our new, lightweight ABS plastic Jack Pucks will save you the aggrevation and you'll know they are always there. Take it to the dealer, a performance shop or the tire shop without worries. You'll always have these pucks ready to protect, invisible to everyone!


Sold as a set of 4, we have these marked down to:

$49.99 A SET!

Click here to order:
http://www.corvettemods.com/Corvette...R-_p_9265.html

richscorvettes

I have a set from Corvette Mods and they easily snapped in place. They are also just the right diameter and it's nice to be able to leave them in place.

Rich

MThomas

How do you remove the pucks once there are installed if they need to be removed?? I know a dumb question but someone had to ask it.

THANKS!!

0corvettemods1

simply pull them out

AmmoVet

Aren't these made by or the same as BMW pucks?

0corvettemods1

Not sure if they are used by BMW. Its possible.

BigJoe

Will the ones I have on my C6 fit on the C7? They look the same in your picture and I think I bought them from you a few years ago.

khoeysr

I have a set on my C7.

Great peace of mind.

2 Ag R8Cs

I would rather not leave them on and only put on if I need them, are the easy to get off if not needed and put back on when needed?

Gr8ful

Why take them off? Extra weight or what. You can't see them unless you are on the floor and they look like the car came from BG with them.

Glen e

correct...you cover a hole and they look nice when you are on your back:

themonk

I will definitely buy a set when my car arrives, somewhere along the way the front fender of my C5 got cracked, I'm not letting that happen again.

2 Ag R8Cs

I would like to see what they look like up close in person before I decide. If I do not like the looks of the car with them on I would like to remove them after I get done using them and do not need them.

There is a good chance I may choose to leave them on but I would like to have the option to take the on and off repeatedly with wearing out the clips.

There is a good chance I may never need to used them. I had a few leased cars that I turned in without ever changing the tires or fixing a flat but I did get a flat on my Volt when it was 20 months old (probably the first flat in 10 or 15 years maybe longer)

Buzzardz_vette

What is the diameter of the pucks? Also, how do these compare to the aluminum pucks you also sell? Which are better?

0corvettemods1

About 3.5" roughly. These are leave in, the aluminum are for usage at the time of need then removed.

Buzzardz_vette

I thought the manual says the puck can't be larger than 2.5".

0corvettemods1

Went and measured one, The contact portion is 2.25"

Buzzardz_vette

By "contact portion", do you mean the portion the contacts the vette or the portion that contacts the jack? The manual is talking about the portion that contacts the vette. Other Forums have talked about the limited space to put in a puck in and still clear the body. Have you actually installed these on a C7 and was there any impingement on the body?

rpoz06

I have a set on my C7 and they fit fine.......

0corvettemods1