[ZR1] Kyle Lemish doing work at MIR DOR2
#1
Kyle Lemish doing work at MIR DOR2
Kyle beating up on a poor gtr. There were more runs than this but this is all I got on video. Good to meet you Kyle
Last edited by gkzr1; 11-10-2013 at 04:59 AM.
#3
Moderator
Member Since: Jul 2005
Location: West MI
Posts: 27,704
Received 3,622 Likes
on
1,741 Posts
CF Banner Relay Captain
West MI & JAX/NE Florida
Events Coordinator
St. Jude Donor '11-'12-'13-'14-'15-'16-'17, '21
WTG Kyle
#4
Team Owner
Kyle beating up on a poor gtr. There were more runs than this but this is all I got on video. Good to meet you Kyle
Zr1 vs GTR roll race @ MIR - YouTube
Zr1 vs GTR roll race @ MIR - YouTube
They need that 60ft! Plus Kyle is as it gets on the stick too!
Last edited by 3 Z06ZR1; 11-10-2013 at 03:43 PM.
#5
Le Mans Master
Nice! From the green cones to the traps about an 1/8th? Other drag strip roll runs I have seen take off at start line to roll the full 1/4, this looks a bit shorter.
I bet Kyle could walk most BPU GTR's even from the dig; doesn't he have on of the fastest DR times?
I bet Kyle could walk most BPU GTR's even from the dig; doesn't he have on of the fastest DR times?
#6
No it was actually farther than that. There was a set of cones a couple hundred feet past the trap.
#7
Drifting
Great to meet you too! Sucks that the track was so slick and my dig passes were terrible, I can normally hook at 5500 RPM launches at MIR, however I was spinning bad at 3000. If I go any lower the car will just bog, still had a fun day. I was even spinning pretty bad on the DR's at a 50 roll in second gear. Never seen MIR that bad.
That GTR was a full bolt on E85 car, but his tune was off I was told. I did get a couple other great Roll races in too that just show how powerfull the ZR1 is in stock form. I pulled pretty good on a couple H/C Z06's and I stayed right on the bumper of one of the fastest stock turbo GTR's in the country. He was full bolt ons and E85 too and his tune is perfect! we have raced alot and when we roll on with him on pump gas i can just start to pull on him at above 100.
My best guess is we were running about 1350' from cone to cone in the roll races.
That GTR was a full bolt on E85 car, but his tune was off I was told. I did get a couple other great Roll races in too that just show how powerfull the ZR1 is in stock form. I pulled pretty good on a couple H/C Z06's and I stayed right on the bumper of one of the fastest stock turbo GTR's in the country. He was full bolt ons and E85 too and his tune is perfect! we have raced alot and when we roll on with him on pump gas i can just start to pull on him at above 100.
My best guess is we were running about 1350' from cone to cone in the roll races.
#8
Racer
Great to meet you too! Sucks that the track was so slick and my dig passes were terrible, I can normally hook at 5500 RPM launches at MIR, however I was spinning bad at 3000. If I go any lower the car will just bog, still had a fun day. I was even spinning pretty bad on the DR's at a 50 roll in second gear. Never seen MIR that bad.
That GTR was a full bolt on E85 car, but his tune was off I was told. I did get a couple other great Roll races in too that just show how powerfull the ZR1 is in stock form. I pulled pretty good on a couple H/C Z06's and I stayed right on the bumper of one of the fastest stock turbo GTR's in the country. He was full bolt ons and E85 too and his tune is perfect! we have raced alot and when we roll on with him on pump gas i can just start to pull on him at above 100.
My best guess is we were running about 1350' from cone to cone in the roll races.
That GTR was a full bolt on E85 car, but his tune was off I was told. I did get a couple other great Roll races in too that just show how powerfull the ZR1 is in stock form. I pulled pretty good on a couple H/C Z06's and I stayed right on the bumper of one of the fastest stock turbo GTR's in the country. He was full bolt ons and E85 too and his tune is perfect! we have raced alot and when we roll on with him on pump gas i can just start to pull on him at above 100.
My best guess is we were running about 1350' from cone to cone in the roll races.
#9
Total racing distance was 1500 ft from cones to cones. here are some more videos BTW,
Hope you dont mind.
Glad you had a good time Kyle
https://www.facebook.com/photo.php?v=556237774446302
https://www.facebook.com/photo.php?v...type=2&theater
https://www.facebook.com/photo.php?v=556217397781673
Hope you dont mind.
Glad you had a good time Kyle
https://www.facebook.com/photo.php?v=556237774446302
https://www.facebook.com/photo.php?v...type=2&theater
https://www.facebook.com/photo.php?v=556217397781673
Last edited by LostM; 11-11-2013 at 08:23 PM.
#11
Drifting
It was a fun event and I think there is a cool future to this type of racing, But if its going to become competitve in any way there has to be much more orginization and ways to make it fair.
1500' .......It was said to be 1500' but it was not a full 1500', it was just over 1500' feet if you measure from the real MIR starting line to the final green cones, and the starting green cones where well out past the 60' mark at the track. There were alot of things about this event that werent as they were advertised.
1500' .......It was said to be 1500' but it was not a full 1500', it was just over 1500' feet if you measure from the real MIR starting line to the final green cones, and the starting green cones where well out past the 60' mark at the track. There were alot of things about this event that werent as they were advertised.
Last edited by Kyle Lemish; 11-12-2013 at 09:35 AM.
#12
Great to meet you too! Sucks that the track was so slick and my dig passes were terrible, I can normally hook at 5500 RPM launches at MIR, however I was spinning bad at 3000. If I go any lower the car will just bog, still had a fun day. I was even spinning pretty bad on the DR's at a 50 roll in second gear. Never seen MIR that bad.
That GTR was a full bolt on E85 car, but his tune was off I was told. I did get a couple other great Roll races in too that just show how powerfull the ZR1 is in stock form. I pulled pretty good on a couple H/C Z06's and I stayed right on the bumper of one of the fastest stock turbo GTR's in the country. He was full bolt ons and E85 too and his tune is perfect! we have raced alot and when we roll on with him on pump gas i can just start to pull on him at above 100.
My best guess is we were running about 1350' from cone to cone in the roll races.
That GTR was a full bolt on E85 car, but his tune was off I was told. I did get a couple other great Roll races in too that just show how powerfull the ZR1 is in stock form. I pulled pretty good on a couple H/C Z06's and I stayed right on the bumper of one of the fastest stock turbo GTR's in the country. He was full bolt ons and E85 too and his tune is perfect! we have raced alot and when we roll on with him on pump gas i can just start to pull on him at above 100.
My best guess is we were running about 1350' from cone to cone in the roll races.
Time to get one of those go pro cams