How to position the rear spindle Teflon washer
11-06-2013, 10:34 PM
Melting Slicks
Thread Starter
Member Since: Jul 2010
Location: Between Tally and Gatorville ,Florida
Posts: 3,454
How to position the rear spindle Teflon washer
How is the rear spindle Teflon washer position on the HUB?
11-07-2013, 12:00 AM
Burning Brakes
Member Since: Jun 2002
Location: Waynesville, Mo
Posts: 751
Likes: 0
I threw mine away when I put in new bearings......has 185k miles now....no problems.
11-07-2013, 12:38 AM
Melting Slicks
Thread Starter
Member Since: Jul 2010
Location: Between Tally and Gatorville ,Florida
Posts: 3,454
Quote:
Originally Posted by
vette40509
I threw mine away when I put in new bearings......has 185k miles now....no problems.
Did you use the dust seals?
11-07-2013, 01:33 AM
11-07-2013, 01:43 AM
- 1986 Original Owner -
Member Since: Apr 1999
Location: North Yorkshire, England
Posts: 3,162
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In IV Veteran
Cruise-In VII Veteran
Quote:
Originally Posted by
Dale002
How is the rear spindle Teflon washer position on the HUB?
Posted by 86PACER back in 2009!
http://forums.corvetteforum.com/1562438578-post7.html
11-07-2013, 01:48 AM
- 1986 Original Owner -
Member Since: Apr 1999
Location: North Yorkshire, England
Posts: 3,162
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In IV Veteran
Cruise-In VII Veteran
Quote:
Originally Posted by
Cliff Harris
Since you didn't state a year…
I believe the part you're interested in is #39:
That's the one, Cliff!