FS: real Carbon Fiber Fuel Rail Covers, FRCs
#1
FS: real Carbon Fiber Fuel Rail Covers, FRCs
For sale is a pair of real carbon fiber fuel rail covers. They simply go right over your stock covers. You can attach them with velcro or 2 sided tape. $165 shipped gets them. They can go out tomorrow. Great condition and great addition to really dress up the engine bay and give it that high end look.
The 5.7L decal has some tiny scuffs to it which aren't really noticable, but are easily replaced or removed.
Passanger side has a tiny wear mark where it occasionly rubs the cowl, but this is obvously completely hidden by the cowl.
Covers were trimmed slightly to fit FAST intakes. They of course still fit the stock intake, but have a straight edge on the inside rather than conforming to each runner. If put over the stock plack covers on a stock intake, barely barely noticable.
The 5.7L decal has some tiny scuffs to it which aren't really noticable, but are easily replaced or removed.
Passanger side has a tiny wear mark where it occasionly rubs the cowl, but this is obvously completely hidden by the cowl.
Covers were trimmed slightly to fit FAST intakes. They of course still fit the stock intake, but have a straight edge on the inside rather than conforming to each runner. If put over the stock plack covers on a stock intake, barely barely noticable.
Last edited by ttz; 08-09-2013 at 09:52 AM.
#4
Melting Slicks
How were you able to trim the carbon fiber? How do the edges look? I have a set of cover I'm not using cause they won't fit my new FAST.. and bump for ya
#8
Melting Slicks
#19