cam only speedway white z #'s
#1
Instructor
Thread Starter
Member Since: Nov 2012
Location: wilmington nc
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
cam only speedway white z #'s
mods are:
Torquemax stage 3 cam (235/243 .623/.621 111 +2)
cloyes billet timing set with c5r chain
brian tooley .660 springs with titanium retainers
brian tooley 7.4 pushrods
kooks 1 7/8 headers
kooks offroad x-pipe
corsa indy axleback
RM twin intake
ngk tr6 plugs
msd wires
the dyno numbers were a little lower than i had hoped for (415-420whp) but it feels strong on the street. Torque curve is nice and it didnt drop off hp at all. Im thinking of raising the limiter from the current 6600-6800 rpm.
idle vid
Torquemax stage 3 cam (235/243 .623/.621 111 +2)
cloyes billet timing set with c5r chain
brian tooley .660 springs with titanium retainers
brian tooley 7.4 pushrods
kooks 1 7/8 headers
kooks offroad x-pipe
corsa indy axleback
RM twin intake
ngk tr6 plugs
msd wires
the dyno numbers were a little lower than i had hoped for (415-420whp) but it feels strong on the street. Torque curve is nice and it didnt drop off hp at all. Im thinking of raising the limiter from the current 6600-6800 rpm.
idle vid
Last edited by rcrflyby; 07-04-2013 at 09:49 PM.
#4
Instructor
Thread Starter
Member Since: Nov 2012
Location: wilmington nc
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Its got some cam surge as you would expect but its nothing crazy. About the same surge as my ms3 I had in my f body. I wanna take it to the track one day but with the stock drive train and clutch it may just be a trap race.
#5
Melting Slicks
I think you'll be fine at the track. My stock clutch did well when I was cam-only. Once I added some heads, and FAST intake....the clutch would drop to the floor on the 2-3 shift
#6
I just made 405 and 383 with the same mods and a 227/239 cam. it made a great torque curve and mid range power like i wanted and is very streetable. they bumped my limiter up to 7100 so i can wind it out to about 6800 as well. there is definitely some left on the table but its really safe now and I'm happy with what its at. for now. enjoy
#8
Melting Slicks
#9
AMP Racing
Member Since: Aug 2006
Location: Washington TWP NJ
Posts: 10,446
Received 466 Likes
on
352 Posts
2023 C5 of the Year Finalist - Modified
2017 C5 of Year Finalist
St. Jude Donor '09-'10-'11-'12
That's a pretty big cam for stock heads... Even for a SW Z...
Enjoy the ride, get heads when you can.
I miss my SW Z
Enjoy the ride, get heads when you can.
I miss my SW Z