waljr

I've had a TPIS miniram setup on my '80 for a while now with a slinky hose duckting to the air filter mounted in front of the air con.
Has anyone got or know of a better setup.
I'm thinking about cutting a hole beside the radiator to get the air filter in front of the radiator.
or runnuing through the origanal ducting over the radiator & into an airbox / filter.

fyi, the clutch fan is gone, I'm running a couple thermo's

oldalaskaman

we need to see pictures, thats a swap I'm thinking about

mrvette

Get to one of my sites below, maybe have to copy/paste, and there are pix of how I did my up/over air induction....

DC3

You flipped your hood to open bassackwards. Any way to run your type of setup with a normal hood?

DC

mrvette

NOPE, and the hood opens like every other car NOW!!!! what you mean ackbasswards???

waljr

just adding a link to simlar post

http://forums.corvetteforum.com/c3-t...ction-box.html

Bangkok Dean

I run a air filter in front of the rad by notching the top of the rad shroud and shorting the hood prop to restrict the opening. The filter sits about 4 inches above the oil cooler so it don't get too much water splash.

The air feed is 4 inch diameter tubing that is flattened oval where it goes over the rad. I don't have FI but this should work the same as my carb system cold air feed.