Engine options?
#1
Drifting
Thread Starter
Engine options?
Ok. Bought my first corvette. Z06 stock engine with a blower on low boost. Want to elimate the possibility of an engine failure with either a crate engine or a build engine. It goin to be a tuff Streeter not a drag car or track car. Don't plan on ranking it much more of a cruiser that sounds n looks tuff. What wud u guys suggest? I'd like to bump the boost to say 14-15psi from the 6-7 now. Crate engine n sell my stock donk? Or buy a new short lsx motor n redo my heads? Pls estimate price of your suggestions. I'm not really doin it to chase more power...I just don't want to grenade the engine make a mess of the car
#2
Melting Slicks
14-15psi and you say you don't want to make more power? That makes no sense. You are more likely to drop a valve than blow the motor if you keep the boost reasonable. If the heads haven't been pulled and rebuilt by a shop like West Coast Cylinder Heads, I would do that.
A built shortblock would be easier to swap out with less down time and you can then sell your shortblock to recoup some cash. Have the heads sent off while the short is getting built. A good place to also list your motor for sale would be Racedezert and GlamisDunes.
A built shortblock would be easier to swap out with less down time and you can then sell your shortblock to recoup some cash. Have the heads sent off while the short is getting built. A good place to also list your motor for sale would be Racedezert and GlamisDunes.
#3
Drifting
Thread Starter
14-15psi and you say you don't want to make more power? That makes no sense. You are more likely to drop a valve than blow the motor if you keep the boost reasonable. If the heads haven't been pulled and rebuilt by a shop like West Coast Cylinder Heads, I would do that.
A built shortblock would be easier to swap out with less down time and you can then sell your shortblock to recoup some cash. Have the heads sent off while the short is getting built. A good place to also list your motor for sale would be Racedezert and GlamisDunes.
A built shortblock would be easier to swap out with less down time and you can then sell your shortblock to recoup some cash. Have the heads sent off while the short is getting built. A good place to also list your motor for sale would be Racedezert and GlamisDunes.
#6
Melting Slicks
#7
I have a perfectly running LS7 LONG block wrapped in shrink wrap here that came out of the shop Z06 with about 20K miles on it. Let me know if you are interested. I believe we are trying to get $9K for it. It is complete from oil pan to intake and valve covers.
#8
Melting Slicks
I have a perfectly running LS7 LONG block wrapped in shrink wrap here that came out of the shop Z06 with about 20K miles on it. Let me know if you are interested. I believe we are trying to get $9K for it. It is complete from oil pan to intake and valve covers.
#9
Drifting
Thread Starter
I have a perfectly running LS7 LONG block wrapped in shrink wrap here that came out of the shop Z06 with about 20K miles on it. Let me know if you are interested. I believe we are trying to get $9K for it. It is complete from oil pan to intake and valve covers.
#10
Drifting
Thread Starter
#11
Melting Slicks
I would still be iffy on premium +torco over 800 rwhp with out meth just because of elevated IATs...
If you dont plan to run 100+ octane all the time i would invest in a meth kit.. and as i said.. just throw rods/pistons in your ls7 and fix the heads.
If you dont plan to run 100+ octane all the time i would invest in a meth kit.. and as i said.. just throw rods/pistons in your ls7 and fix the heads.
#12
Melting Slicks
if you plan on going bigger... just do a 427 LSX, Mast heads and be done with it.
#13
Just has a mild cam, pushrods and springs.
No worries. Was just throwing it out there as you mentioned "crate engine" in the OP.
No worries. Was just throwing it out there as you mentioned "crate engine" in the OP.
#15
Melting Slicks
Worst case you can throw in an oil cooler too. for chasing a number most people will reccomend a 6 bolt setup, Besides the LSX i believe the other 6 bolt blocks are considerably more pricey.
#16
Drifting
Thread Starter
I live in Tx, and the iron block is fine as long as you upgrade the radiator IMO
Worst case you can throw in an oil cooler too. for chasing a number most people will reccomend a 6 bolt setup, Besides the LSX i believe the other 6 bolt blocks are considerably more pricey.
Worst case you can throw in an oil cooler too. for chasing a number most people will reccomend a 6 bolt setup, Besides the LSX i believe the other 6 bolt blocks are considerably more pricey.
#17
Drifting
Thread Starter
#18
Melting Slicks
#19
Drifting
Thread Starter
what are these texas speed lsx 427 6 bolt head long engines like? they seem very good value! 11k n i can still sell off my stock ls7 while it still breathes
http://www.texas-speed.com/p-471-tsp...ong-block.aspx
http://www.texas-speed.com/p-471-tsp...ong-block.aspx
#20
Drifting
Thread Starter
anyone else like summit or jegs sell a strong ls7 based long engine thats resonably priced? some ppl are talkin 20k to rebuild mine