C6 Tech/Performance LS2, LS3, LS7, LS9 Corvette Technical Info, Internal Engine, External Engine, Tech Topics, Basic Tech, Maintenance, How to Remove & Replace
Sponsored by:
Sponsored by:

Fob programming #1 short or long method?

Thread Tools
 
Search this Thread
 
Old 05-15-2013, 04:48 AM
  #1  
greenbeauty
Instructor
Thread Starter
 
greenbeauty's Avatar
 
Member Since: Jan 2011
Location: The Netherlands!
Posts: 127
Likes: 0
Received 1 Like on 1 Post
Default Fob programming #1 short or long method?

I want to program my new fob for my C6..
The only fob I have is fob #2 (on the back) ..

I've bought a new one with #1 on it..

Can I use the short methode ?
Or do I need to do the erase all procedure ?



Short methode:

1. Put drivers window down all the way, then turn car off
2. Trunk open
3. Glove box open
4. Put working fob on console next to shifter (the one you are currently using to drive the car) IMPORTANT. Also make sure no cellphones are in the car.
5. Put key in trunk keyhole and turn key five times in less than 5 seconds.
6. DIC will now beep and light up and say “Ready for fob 3”.
7. Put new unprogrammed fob in slot by glovebox with buttons facing right (passenger) side.
8. Wait and watch DIC. When it says “Ready for fob 4” it is done. Up to four Fobs may be programmed to the car total.
9. When all Fobs are programmed, push OFF/ACC (bottom half of start button) to turn off DIC.
10. Test all four buttons on fob and then take away all other fobs and check car starting with new fob(s).
Old 05-15-2013, 10:34 AM
  #2  
eboggs_jkvl
Moderator/Tech Contributor

 
eboggs_jkvl's Avatar
 
Member Since: Jun 2001
Location: Jacksonville Florida BWO Dayton, Cincinnati, Bloomsbury NJ, Cincinnati
Posts: 18,198
Received 3,813 Likes on 2,060 Posts
2015 C7 of the Year Finalist

Default

Long method and put the case with the #1 in as the first to be programmed.

Keep this handy..

>>C6 Fob Programming and Glove Box Slot Testing Procedures<<

Elmer
Old 05-15-2013, 10:45 AM
  #3  
Bill Dearborn
Tech Contributor
 
Bill Dearborn's Avatar
 
Member Since: Oct 1999
Location: Charlotte, NC (formerly Endicott, NY)
Posts: 40,078
Received 8,919 Likes on 5,328 Posts

Default

Originally Posted by eboggs_jkvl
Long method and put the case with the #1 in as the first to be programmed.

Keep this handy..

>>C6 Fob Programming and Glove Box Slot Testing Procedures<<

Elmer
If you use the short method the new fob will be programmed as fob 3 and it will not have access to all of the DIC key choices.

Bill
Old 05-15-2013, 11:40 AM
  #4  
greenbeauty
Instructor
Thread Starter
 
greenbeauty's Avatar
 
Member Since: Jan 2011
Location: The Netherlands!
Posts: 127
Likes: 0
Received 1 Like on 1 Post
Default

Mmm what dou mean with 'access all of the dic key choices??

What are those?...
Old 05-15-2013, 11:49 AM
  #5  
eboggs_jkvl
Moderator/Tech Contributor

 
eboggs_jkvl's Avatar
 
Member Since: Jun 2001
Location: Jacksonville Florida BWO Dayton, Cincinnati, Bloomsbury NJ, Cincinnati
Posts: 18,198
Received 3,813 Likes on 2,060 Posts
2015 C7 of the Year Finalist

Default

Originally Posted by greenbeauty
Mmm what dou mean with 'access all of the dic key choices??

What are those?...
When you are in the car with FOB #1 and have set your radio, side mirror, seat location, Welcome message on the DIC (mine has my name) etc. the car will remember those preferences the next time. If your SO uses FOB #2 and sets all of those things, the car will remember those when Key FOB #2 is used. FOBS 3 & 4 do not have that ability to program anything in the DIC.

Elmer

Last edited by eboggs_jkvl; 05-15-2013 at 11:53 AM.
Old 05-15-2013, 12:21 PM
  #6  
cclive
Team Owner
 
cclive's Avatar
 
Member Since: Mar 2008
Location: Southern Utah
Posts: 21,506
Received 434 Likes on 371 Posts
Default

Exactly...#3 and 4 will only unlock the car and start it...seat position, radio stations etc etc will not be set as part of the deal. Use the full long procedure including the test of the glovebox slot...always a good idea before doing the long one.

Get notified of new replies

To Fob programming #1 short or long method?




Quick Reply: Fob programming #1 short or long method?



All times are GMT -4. The time now is 10:10 PM.