Lifting a C7............
#1
Race Director
Thread Starter
Lifting a C7............
I don't know if this has been talked about yet, but I wonder if the C7 will suffer the same fate at the dealers as the C6....cracked rockers. Does anyone know if jacking pucks will be needed on the C7?
#2
Le Mans Master
They are already lifted, have'nt you seen the fender gap?
#3
#4
Team Owner
Hey Randy,
They will lift similar to the C6/Z06 and yes, if not done properly will suffer the same fate as the C6.
They will lift similar to the C6/Z06 and yes, if not done properly will suffer the same fate as the C6.
#5
Melting Slicks
#6
Team Owner
#7
Race Director
Thread Starter
#10
Moderator
Paul, will the Elite Engineering pucks work on the C7?
#14
Moderator
#15
Le Mans Master
Member Since: Jul 2009
Location: Los Angeles California
Posts: 9,526
Likes: 0
Received 10 Likes
on
10 Posts
I would imagine the C7 will be harder to lift from the back. On the C5s I put a piece of wood across the cradle beams in the back and lift from the wood. But I suspect that the C7 is going to be completely different back there.
I'm just glad I won't be doing any work on it for a few years.
I'm just glad I won't be doing any work on it for a few years.