WTB A/O Forced Air Kit
#2
Tech Contributor
Dont forget the pieces that mate to the duct, ie the snap ring for the bottom of the hosuing and the snap connecter to the back sde of the defuser.
#8
Le Mans Master
Thread Starter
I recently bought out A/O Engineering's remaining parts cache'. They no longer offer the Forced Air kit. As of this time, I am the only supplier of the A/O parts.
I am bringing to market a slightly improved, new design of Forced Air for 1984 -1996 Corvettes. BFR Air Blast kit.
Not sure if I'll become a supporting vendor here but most likely will.
I am bringing to market a slightly improved, new design of Forced Air for 1984 -1996 Corvettes. BFR Air Blast kit.
Not sure if I'll become a supporting vendor here but most likely will.
#11
Intermediate
Member Since: Nov 2012
Location: Lagrange Kentucky
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
I am looking for the licence plate intake portion ,I bought car and someone has cut out behind the plate for air intake but just covered the hole with the plate.I have a fpk cold air intake but fresh air to it can't hurt and I would like to fill the hole in the bumper with something besides a plate.Plate intake and hose if possible since it is cut out behind plate.
#12
Race Director
I recently bought out A/O Engineering's remaining parts cache'. They no longer offer the Forced Air kit. As of this time, I am the only supplier of the A/O parts.
I am bringing to market a slightly improved, new design of Forced Air for 1984 -1996 Corvettes. BFR Air Blast kit.
Not sure if I'll become a supporting vendor here but most likely will.
I am bringing to market a slightly improved, new design of Forced Air for 1984 -1996 Corvettes. BFR Air Blast kit.
Not sure if I'll become a supporting vendor here but most likely will.
#13
Le Mans Master
Thread Starter
#15
Race Director
I recently bought out A/O Engineering's remaining parts cache'. They no longer offer the Forced Air kit. As of this time, I am the only supplier of the A/O parts.
I am bringing to market a slightly improved, new design of Forced Air for 1984 -1996 Corvettes. BFR Air Blast kit.
Not sure if I'll become a supporting vendor here but most likely will.
I am bringing to market a slightly improved, new design of Forced Air for 1984 -1996 Corvettes. BFR Air Blast kit.
Not sure if I'll become a supporting vendor here but most likely will.
#16
Race Director
I have been running one for years. I couldn't tell you if it makes and difference or not as far as power goes. Keep in mind these cars tune themselves on the fly to a certain degree. If you are able to get increased air flow into the plenum at triple digits then you will need more fuel runing through the injectors to get more power. I think the biggest advantage is getting fresh air from in front of the car instead of getting it from under the hood. Cold air itself makes a significant difference and 30+ degree mornings are noticeably better !
#17
I recently bought out A/O Engineering's remaining parts cache'. They no longer offer the Forced Air kit. As of this time, I am the only supplier of the A/O parts.
I am bringing to market a slightly improved, new design of Forced Air for 1984 -1996 Corvettes. BFR Air Blast kit.
Not sure if I'll become a supporting vendor here but most likely will.
I am bringing to market a slightly improved, new design of Forced Air for 1984 -1996 Corvettes. BFR Air Blast kit.
Not sure if I'll become a supporting vendor here but most likely will.
#18
Melting Slicks
Great Plan!!!
Weren't you at one time looking into making a replacement for the 49th street rocker panels, or whatever they were called?
If so, seems like you have the makings of a "Vette Daddy Package"
Just think....... fame and fortune.
OK at least fame on CF and within the ZR-1 community.
It's great to see so many hard to get parts attracting those that want and can respond to the opportunity and demand. That is the way buisnesses are built.
Carter, Jerry, Mark, David the master trader, AKA as "David the buyer, installer, de-installer, next part please, pass it on and spread the joy" etc......................
You guys should gather and start your own C-4 Shopping Mall.
Guess I'll have to thank Obama for building that!
Look forward to seeing your finished product(s).
and...........
THANKS!
Marty
1FUNZR1
Weren't you at one time looking into making a replacement for the 49th street rocker panels, or whatever they were called?
If so, seems like you have the makings of a "Vette Daddy Package"
Just think....... fame and fortune.
OK at least fame on CF and within the ZR-1 community.
It's great to see so many hard to get parts attracting those that want and can respond to the opportunity and demand. That is the way buisnesses are built.
Carter, Jerry, Mark, David the master trader, AKA as "David the buyer, installer, de-installer, next part please, pass it on and spread the joy" etc......................
You guys should gather and start your own C-4 Shopping Mall.
Guess I'll have to thank Obama for building that!
Look forward to seeing your finished product(s).
and...........
THANKS!
Marty
1FUNZR1
#19
Le Mans Master
Thread Starter
[QUOTE=DRM500RUBYZR-1;1583196742]Great Plan!!!
Weren't you at one time looking into making a replacement for the 49th street rocker panels, or whatever they were called?
Yep. The 49th Street Rocker project was put on hold until recently. Updates coming as new molds are made.
Weren't you at one time looking into making a replacement for the 49th street rocker panels, or whatever they were called?
Yep. The 49th Street Rocker project was put on hold until recently. Updates coming as new molds are made.
#20
Did you get an Air Cleaner Lid? I've not been able to check yet but thought with the responses you've had maybe the situation is taken care of. I will likely check later today or Sunday AM.
-Dave
-Dave