[Z06] **** C6 ZR1 Painted & Hydro Carbon Fiber Spoiler Group Purchase ****
01-24-2013, 02:38 PM
#1
Former Vendor
Thread Starter
Member Since: Jan 2011
Location: Orlando Florida
Posts: 5,350
Likes: 0
Received 4 Likes
on
4 Posts
St. Jude Donor '11-'12-'13-'14, '16
**** C6 ZR1 Painted & Hydro Carbon Fiber Spoiler Group Purchase ****
Corvette C6 ZR1 Rear Spoilers are now on sale starting at $179.99 for Forum Members!
Our spoilers are available in Any Custom Painted Corvette C6 Body Color or in any of our Carbon Fiber Hydrographic Finishes
We will run this GP at our sale pricing for 10 People ONLY - We will update in the post as orders are received
After those 10 spoilers have been finished & shipped out we will run another GP
Manufactured Exclusively for Performance Corvettes!
Fiberglass Construction
Utilizes OEM Mounting Design & OEM Mounting Clips!
Mounts to the rear bumper using the (4) center existing bolts from your stock 3rd brake light spoiler
The (6) Additional OEM mounting clips for installation can be purchased with your spoiler for $19.95
Installation in the Orlando, Florida Area is available for $90.00 - Please contact us after purchase to set up an appointment
Unfinished spoilers are now IN STOCK!
Custom Painted & Hydro Carbon Fiber Spoilers require a 4 - 110 Business Days for Shipment - In Stock Finishes will ship within 2 Business Days
PayPal is accepted to Jake@PerformanceCorvettes.com or send us your PayPal email and we'll send you over an invoice
You May also call us at 1.800.516.3446 to place your order over the phone
All Website orders can be placed using this link:
http://www.performancecorvettes.com/...52d-2013-.html
Thank You!
$
Our spoilers are available in Any Custom Painted Corvette C6 Body Color or in any of our Carbon Fiber Hydrographic Finishes
We will run this GP at our sale pricing for 10 People ONLY - We will update in the post as orders are received
After those 10 spoilers have been finished & shipped out we will run another GP
Manufactured Exclusively for Performance Corvettes!
Fiberglass Construction
Utilizes OEM Mounting Design & OEM Mounting Clips!
Mounts to the rear bumper using the (4) center existing bolts from your stock 3rd brake light spoiler
The (6) Additional OEM mounting clips for installation can be purchased with your spoiler for $19.95
Installation in the Orlando, Florida Area is available for $90.00 - Please contact us after purchase to set up an appointment
Unfinished spoilers are now IN STOCK!
Custom Painted & Hydro Carbon Fiber Spoilers require a 4 - 110 Business Days for Shipment - In Stock Finishes will ship within 2 Business Days
PayPal is accepted to Jake@PerformanceCorvettes.com or send us your PayPal email and we'll send you over an invoice
You May also call us at 1.800.516.3446 to place your order over the phone
All Website orders can be placed using this link:
http://www.performancecorvettes.com/...52d-2013-.html
Thank You!
$
Last edited by PerformanceCorvettes; 01-29-2013 at 10:08 AM.
01-25-2013, 08:08 AM
#3
I recently purchased one of these spoilers from Jake and when I finally got it, was impressed. The quality is great, the paint is good. Well worth the purchase. But I HIGHLY recommend people purchasing the extra clips with the spoiler. I did not and the spoiler did not sit correctly at the edge. It would not sit flush (lifted off of the body with a large gap) and 3M tape would NOT keep the spoiler down. But I made some clips myself and installed those and now the spoiler sits to the body correctly and i love it.
01-25-2013, 08:30 AM
#4
Racer
Member Since: Jun 2005
Location: Sierra Vista AZ
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
I recently purchased one of these spoilers from Jake and when I finally got it, was impressed. The quality is great, the paint is good. Well worth the purchase. But I HIGHLY recommend people purchasing the extra clips with the spoiler. I did not and the spoiler did not sit correctly at the edge. It would not sit flush (lifted off of the body with a large gap) and 3M tape would NOT keep the spoiler down. But I made some clips myself and installed those and now the spoiler sits to the body correctly and i love it.
01-25-2013, 10:25 AM
#5
You will need to drill 4 holes where the 4 clips come into contact with the body. Was not a big deal and it came out great!. Without these 4 clips though, the spoiler is lifted and doesn't look "finished". Like I said, you can try using 3M tape to stick the edges down, but that method did NOT work for me and the spoiler kept popping up.
I can post up pictures of my installed spoiler if anyone want to see it.
I can post up pictures of my installed spoiler if anyone want to see it.
01-25-2013, 10:53 AM
#6
Former Vendor
Thread Starter
Member Since: Jan 2011
Location: Orlando Florida
Posts: 5,350
Likes: 0
Received 4 Likes
on
4 Posts
St. Jude Donor '11-'12-'13-'14, '16
Drilling is always recommended with this spoiler. Yes, you CAN install it with 3M tape, but we don't recommend that, we only state that as an option for guys who don't want to drill into their bumpers
If purchased, we send 6 OEM clips with the spoilers since there are 6 mounting points, same as the OEM piece, they slide into those openings. I'm sure you could get away with 4, but since there are 6 mounting points, we send 6
You'll just need 6 washers to bolt it on from the bottom
I know some guys like to turn their cars back to stock when they sell them, which is why the want to install this spoiler without drilling any holes, but with the price we sell these for I do recommend just leaving the spoiler on the car since you won't gain much by selling a used aftermarket spoiler
Gonzer, please email us over some pics or post them up here, that would be nice, thanks!
And for easy install, you do not need a template & I find those more confusing anyway. The GM template for the Ron Fellows spoiler is huge and covers the entire bumper so making copies of those is just a pain
Just lay the spoiler on the bumper where you want it to sit, grab a sharpie or your wife's favorite lipstick, mark off where the bottom of the bolts touch the bumper and there are your drill holes
Any other questions on anything, just let me know
thanks!
If purchased, we send 6 OEM clips with the spoilers since there are 6 mounting points, same as the OEM piece, they slide into those openings. I'm sure you could get away with 4, but since there are 6 mounting points, we send 6
You'll just need 6 washers to bolt it on from the bottom
I know some guys like to turn their cars back to stock when they sell them, which is why the want to install this spoiler without drilling any holes, but with the price we sell these for I do recommend just leaving the spoiler on the car since you won't gain much by selling a used aftermarket spoiler
Gonzer, please email us over some pics or post them up here, that would be nice, thanks!
And for easy install, you do not need a template & I find those more confusing anyway. The GM template for the Ron Fellows spoiler is huge and covers the entire bumper so making copies of those is just a pain
Just lay the spoiler on the bumper where you want it to sit, grab a sharpie or your wife's favorite lipstick, mark off where the bottom of the bolts touch the bumper and there are your drill holes
Any other questions on anything, just let me know
thanks!
02-02-2013, 03:18 PM
#19
Former Vendor
Thread Starter
Member Since: Jan 2011
Location: Orlando Florida
Posts: 5,350
Likes: 0
Received 4 Likes
on
4 Posts
St. Jude Donor '11-'12-'13-'14, '16
Orders need to be placed on our website or by sending a PayPal payment to Jake@PerformanceCorvettes.com
Sending over a PM or Email saying you want one does not count as an order
Link to our website is here:
http://www.performancecorvettes.com/...52d-2013-.html
Thanks!
Happy Super Bowl Weekend Everyone!
Sending over a PM or Email saying you want one does not count as an order
Link to our website is here:
http://www.performancecorvettes.com/...52d-2013-.html
Thanks!
Happy Super Bowl Weekend Everyone!
Last edited by PerformanceCorvettes; 02-02-2013 at 03:31 PM.
