kooks 1 7/8, t1 swaybars, exoskell
#1
Race Director
Thread Starter
kooks 1 7/8, t1 swaybars, exoskell
Local only stuff (metro NY area, willing to meet within reason, have a truck for the bigger items)
I have a set of 1 7/8 kooks headers with a 3" catted mid section for sale $900 SOLD
Black hood off 03Z $300
Rear bumper cover in Nassau Blue off 00 FRC $300
Black dash pad out of 25K mile 00 (no heads up) $300
00 grey painted thinspoke wheels with stock runflats with 10k miles $500 (no center caps)
02 Z06 OEM speedlines with nitto 555R2's mounted $750(think rears are close to done)
Willing to ship stuff
Borla touring catback (large fullsize cans) $300 SOLD
Borla straight pipes (SUPER loud) $200 - one was cut before I got them had it rewelded
T1 sways with the solid endlinks $600
Set of solid endlinks missing one of 8 bolts $60 bucks
textrailia exoskel twin disc with about 500 miles on it (turned that car back to stock to sell it and put a LS2 clutch behind the stock LS1, this is overkill for stock power) $600
harnesses.
Engine harness for 00 $225 (need a IAT plug)
Manual trans harness for 00 $100
Manual trans harness for 01 $100 (this gains an trans temp sensor)
The trans harnesses and engine harnesses are different between the years where they connect to each other flat vs D shaped connectors and 5 wire vs 3 wire maf and seperate IAT's
Also 01 Z06 PCM $100
I have a set of 1 7/8 kooks headers with a 3" catted mid section for sale $900 SOLD
Black hood off 03Z $300
Rear bumper cover in Nassau Blue off 00 FRC $300
Black dash pad out of 25K mile 00 (no heads up) $300
00 grey painted thinspoke wheels with stock runflats with 10k miles $500 (no center caps)
02 Z06 OEM speedlines with nitto 555R2's mounted $750(think rears are close to done)
Willing to ship stuff
Borla touring catback (large fullsize cans) $300 SOLD
Borla straight pipes (SUPER loud) $200 - one was cut before I got them had it rewelded
T1 sways with the solid endlinks $600
Set of solid endlinks missing one of 8 bolts $60 bucks
textrailia exoskel twin disc with about 500 miles on it (turned that car back to stock to sell it and put a LS2 clutch behind the stock LS1, this is overkill for stock power) $600
harnesses.
Engine harness for 00 $225 (need a IAT plug)
Manual trans harness for 00 $100
Manual trans harness for 01 $100 (this gains an trans temp sensor)
The trans harnesses and engine harnesses are different between the years where they connect to each other flat vs D shaped connectors and 5 wire vs 3 wire maf and seperate IAT's
Also 01 Z06 PCM $100
Last edited by undertaker; 01-12-2016 at 10:12 PM. Reason: found more parts.....there's always more parts...
#4
#5
Race Director
Thread Starter
the midpipes are 5-6 ft tall and welded guys, I dont even know if they'll ship it that big.
I had them on a 2000, doesn't have any of those stupid air tube pollution crap, made 800 rwhp with a boosted 346 with em.
As for the straight pipes probably 25-30 bucks if I have to guess, I never find out until I box them and walk into the UPS store and pay. (If I boxed them and I'm there, they're going out)
I know a fullsize catback ran 96 bucks from TX to NY
here's some pics from when they came out of the car. Obviously still a bit dirty since I windowed the engine block.
I had them on a 2000, doesn't have any of those stupid air tube pollution crap, made 800 rwhp with a boosted 346 with em.
As for the straight pipes probably 25-30 bucks if I have to guess, I never find out until I box them and walk into the UPS store and pay. (If I boxed them and I'm there, they're going out)
I know a fullsize catback ran 96 bucks from TX to NY
here's some pics from when they came out of the car. Obviously still a bit dirty since I windowed the engine block.
Last edited by undertaker; 01-15-2013 at 07:08 PM.
#6
Pro
Wow...if the headers are still available next week (lol) I'm def a buyer. Located in NY.
Edit: or not, from what I'm seeing, headers from a 00 won't fit an 03z? Hope that's wrong.
Edit: or not, from what I'm seeing, headers from a 00 won't fit an 03z? Hope that's wrong.
Last edited by v03z06; 01-15-2013 at 07:47 PM.
#7
Race Director
Thread Starter
I work in Somers so meeting up with you wouldn't be much of a problem as well.
#9
Pro
Awesome..good luck with sale, and if they don't sell by next week maybe I'll be seeing you!
#11
I will take the Borla touring. PMing you now.
#12
Le Mans Master
Member Since: Apr 2005
Location: Scarborough ONTARIO
Posts: 8,077
Likes: 0
Received 3 Likes
on
3 Posts
textrailia exoskel twin disc with about 500 miles on it (turned that car back to stock to sell it and put a LS2 clutch behind the stock LS1, this is overkill for stock power) $600
Is this comes with Flywheel too? nay pics of this clutch?
Is this comes with Flywheel too? nay pics of this clutch?
#13
Race Director
Thread Starter
Yes comes with flywheel i can grab a few pics
#18
Race Director
Thread Starter
catback I sent out yesterday cost 74.16 to send to kansas via ups.
I'm guessing gas would be worse at 11 mpg.
And I want/need a pfadt carbon driveshaft for a C5 6speed, tore the tube down on the C5R car to replace the guibos with DSS ones that finally came in after 4 weeks to find my shaft is bent and guibos are fine.
So I'll happy trade stuff add cash if anyone has one.
I'm guessing gas would be worse at 11 mpg.
And I want/need a pfadt carbon driveshaft for a C5 6speed, tore the tube down on the C5R car to replace the guibos with DSS ones that finally came in after 4 weeks to find my shaft is bent and guibos are fine.
So I'll happy trade stuff add cash if anyone has one.
#20
Race Director
Thread Starter