Procharger p1 kit
#4
Drifting
Thread Starter
i just took it off my car on saturday, everything I took off went inside a box. It will also imclude a the cradle to drop the radiator so u can run the airfilter over the radiator. U will only need to buy the kit to pin ur pulley and ur fuel system.
#6
Drifting
Thread Starter
sent out a couple of pms
#13
Advanced
Member Since: Aug 2012
Location: Lafayette IN
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Did your buddy buy it new or was it used?new to the supercharger deal but is 16k miles a lot for these? How long do they normally last before a rebuild is needed?
#16
Team Owner
BUMP for you and a little input!
Funny you should say that - these are "NOT" the baby Intercoolers these are the larger edition of the Twin Intercoolers Procharger makes -
These are actually very, very efficient and keep IAT's down by splitting the Forced Induction Cahrge and then meeting up again -
So just for information sake - on my 347 with this set-up I made 701 RWHP on 14 PSI of Boost and a 3.2" pulley -
With this set-up my buddy made 565 RWHP on his fulley stock '04 MN6 Coupe with a 3.6" pulley and 12.5 PSI of Boost
This Procharger and set-up will make tremendous power, especially when combined on a H/C set-up -
Thanks,Matt
Funny you should say that - these are "NOT" the baby Intercoolers these are the larger edition of the Twin Intercoolers Procharger makes -
These are actually very, very efficient and keep IAT's down by splitting the Forced Induction Cahrge and then meeting up again -
So just for information sake - on my 347 with this set-up I made 701 RWHP on 14 PSI of Boost and a 3.2" pulley -
With this set-up my buddy made 565 RWHP on his fulley stock '04 MN6 Coupe with a 3.6" pulley and 12.5 PSI of Boost
This Procharger and set-up will make tremendous power, especially when combined on a H/C set-up -
Thanks,Matt
#17
Drifting
Thread Starter
BUMP for you and a little input!
Funny you should say that - these are "NOT" the baby Intercoolers these are the larger edition of the Twin Intercoolers Procharger makes -
These are actually very, very efficient and keep IAT's down by splitting the Forced Induction Cahrge and then meeting up again -
So just for information sake - on my 347 with this set-up I made 701 RWHP on 14 PSI of Boost and a 3.2" pulley -
With this set-up my buddy made 565 RWHP on his fulley stock '04 MN6 Coupe with a 3.6" pulley and 12.5 PSI of Boost
This Procharger and set-up will make tremendous power, especially when combined on a H/C set-up -
Thanks,Matt
Funny you should say that - these are "NOT" the baby Intercoolers these are the larger edition of the Twin Intercoolers Procharger makes -
These are actually very, very efficient and keep IAT's down by splitting the Forced Induction Cahrge and then meeting up again -
So just for information sake - on my 347 with this set-up I made 701 RWHP on 14 PSI of Boost and a 3.2" pulley -
With this set-up my buddy made 565 RWHP on his fulley stock '04 MN6 Coupe with a 3.6" pulley and 12.5 PSI of Boost
This Procharger and set-up will make tremendous power, especially when combined on a H/C set-up -
Thanks,Matt