F/S C5R Cylinder heads, second design
12-05-2012, 05:49 PM
#1
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
F/S C5R Cylinder heads, second design
I have one pair of C5R cylinder heads, second design, that I have on the shelf to sell.
These are 100% un-touched from GM and impossible to get.
Bare C5R
Racing Cylinder Head
MSRP is well over $1990 each cylinder head.
$1500 ea + shipping.
These are 100% un-touched from GM and impossible to get.
Bare C5R
Racing Cylinder Head
- 355-T7 'as-cast' Aluminum racing head
- Professional porting and machining of combustion chambers required
- No seats or guides
- C5R rectangle port design requires aftermarket rectangle port intake manifolds
- Designed for 2.180"/1.625" valves
- 11' valve angle
- Machined for 1.625" diameter valve springs & .500" guides
- Designed for big bore (4.100" min) LS7/C5R/LSX blocks
- 210cc 'as-cast' intake ports
- 70cc 'as-cast' exhaust ports, same as production LS6
- 30cc 'as-cast' combustion chambers
- All fasteners are metric
- Valve cover rails have O-ring groove for .125" O-ring
Capable of over 800 horsepower!
MSRP is well over $1990 each cylinder head.
$1500 ea + shipping.
12-15-2012, 11:27 AM
#3
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
If you would like, we can have these ported for your engine, inquire about finishing them for you build.