FS: 2006 targa A6 heads/cam forged CCW
11-21-2012, 01:00 AM
#1
Drifting
Thread Starter
Member Since: Feb 2009
Location: Hoffman Estates Illinois
Posts: 1,408
Likes: 0
Received 0 Likes
on
0 Posts
FS: 2006 targa A6 heads/cam forged CCW
SOLD!!
UPDATE: A/c is back on the car and fully functional!!
Up for sale is a built super clean machine silver 06 targa glass top..
Base model
CLEAN CARFAX!!
Southern car originally out of florida.. When I bought the car I flew down and drove it back all the way from Louisiana without a single problem. Car drives like a dream..was averaging 27mpg with the converter locked.
The car currently has 54k miles on the body..
10k on the trans and diff..
And only 70 miles on the new motor!!!
Always garage kept.
Never seen snow
Non smoker
All oil changes done on time
I've owned 3 corvettes, this one being my 3rd..all of my vettes are always pampered and only get the absolute best!!
Bring this beast to a car show or track and pop the hood, she looks stock as can be!! till you fire her up and watch everyone's jaws drop!
Motor:
Assembled and tuned by speed inc.
everything brand spanking new out of the wrappers besides the block
Freshly machined,honed and cleaned 6.0 block..stock bore,stock stroke.
Forged diamond pistons with -2.8cc reliefs..stock bore
Forged eagle H-beam rods, length 6.200
New stock crank
Clevite rod bearings
Cam bearings
MS4 cam
SLP oil pump
Double Roller timing chain
46lb FAST injectors
UD pulley
ARP rod bolts
ARP balancer bolt
Ported LS2 intake manifold
Vararam intake
dewitts high performance aluminum radiator
HAVE ALL RECEIPTS FROM SPEED INC FOR MOTOR AND CONVERTER.
Heads:
Worked by Wegners motorsports..absolutely amazing job! Awesome guys!
Ported/polished 799 heads
Milled .030 to get 11.2:1 compression
LS9 head gaskets
Stock rockers
Manley valves
PAC .675 lift double springs with titanium retainers.
7.400 hardened pushrods
ARP head bolts
Drivetrain:
All work done within 10k miles ago by Horsepower Sales of Florida
A6 transmission..was freshened up and got upgraded clutch packs
Trans cooler
RPM built differential with a 3.42 gear
Pfadt mounts
Yank 3600SS (just put in by Speed Inc..less than 100 miles on converter)
Exhaust:
1 7/8 American racing headers
3inch xpipe
At the moment the exhaust has turn downs right out the x-pipe..but I do have a dual mode c6z06 cat back that will go with the car if I don't put it n by time it sells..
Exterior: 9.5/10... Paint is absolutely gorgeous..only a few typical rock chips on front bumper...no accidents,scratches,dents,cracks,etc.
Has a aftermarket spoiler not sure on the brand.
Blacked out tail lights, front and rear side markers
Lowered
5% tint side windows and rear
Cleanest machine silver c6 you'll find!!!!
Interior: 9/10.. Excellent shape
Wolfe 6-point roll cage with removable side bars.
6point harness
Go-pro mount on the roll bar
The mirror cover on the passenger side visor is broke, cheap fix
the rear carpet has 2 cuts in it for the roll cage..that's it!!! Everything else is flawless..NO LEAKS
I also have a 16" CCW drag pack with hoosier drag radials that can be sold with the car but price will go up. The car will have flawless stock c6 wheels on it.
Price is $32,000 OBO without CCWs
i have well over that invested!!
I will also entertain trade offers..
Car is located in Hoffman Estates, IL
Can be reached the easiest Via text anytime 847-707-8013
Don't mind the plates from my z06 i had prior to this vette
Motor and Heads
Video with new motor
UPDATE: A/c is back on the car and fully functional!!
Up for sale is a built super clean machine silver 06 targa glass top..
Base model
CLEAN CARFAX!!
Southern car originally out of florida.. When I bought the car I flew down and drove it back all the way from Louisiana without a single problem. Car drives like a dream..was averaging 27mpg with the converter locked.
The car currently has 54k miles on the body..
10k on the trans and diff..
And only 70 miles on the new motor!!!
Always garage kept.
Never seen snow
Non smoker
All oil changes done on time
I've owned 3 corvettes, this one being my 3rd..all of my vettes are always pampered and only get the absolute best!!
Bring this beast to a car show or track and pop the hood, she looks stock as can be!! till you fire her up and watch everyone's jaws drop!
Motor:
Assembled and tuned by speed inc.
everything brand spanking new out of the wrappers besides the block
Freshly machined,honed and cleaned 6.0 block..stock bore,stock stroke.
Forged diamond pistons with -2.8cc reliefs..stock bore
Forged eagle H-beam rods, length 6.200
New stock crank
Clevite rod bearings
Cam bearings
MS4 cam
SLP oil pump
Double Roller timing chain
46lb FAST injectors
UD pulley
ARP rod bolts
ARP balancer bolt
Ported LS2 intake manifold
Vararam intake
dewitts high performance aluminum radiator
HAVE ALL RECEIPTS FROM SPEED INC FOR MOTOR AND CONVERTER.
Heads:
Worked by Wegners motorsports..absolutely amazing job! Awesome guys!
Ported/polished 799 heads
Milled .030 to get 11.2:1 compression
LS9 head gaskets
Stock rockers
Manley valves
PAC .675 lift double springs with titanium retainers.
7.400 hardened pushrods
ARP head bolts
Drivetrain:
All work done within 10k miles ago by Horsepower Sales of Florida
A6 transmission..was freshened up and got upgraded clutch packs
Trans cooler
RPM built differential with a 3.42 gear
Pfadt mounts
Yank 3600SS (just put in by Speed Inc..less than 100 miles on converter)
Exhaust:
1 7/8 American racing headers
3inch xpipe
At the moment the exhaust has turn downs right out the x-pipe..but I do have a dual mode c6z06 cat back that will go with the car if I don't put it n by time it sells..
Exterior: 9.5/10... Paint is absolutely gorgeous..only a few typical rock chips on front bumper...no accidents,scratches,dents,cracks,etc.
Has a aftermarket spoiler not sure on the brand.
Blacked out tail lights, front and rear side markers
Lowered
5% tint side windows and rear
Cleanest machine silver c6 you'll find!!!!
Interior: 9/10.. Excellent shape
Wolfe 6-point roll cage with removable side bars.
6point harness
Go-pro mount on the roll bar
The mirror cover on the passenger side visor is broke, cheap fix
the rear carpet has 2 cuts in it for the roll cage..that's it!!! Everything else is flawless..NO LEAKS
I also have a 16" CCW drag pack with hoosier drag radials that can be sold with the car but price will go up. The car will have flawless stock c6 wheels on it.
Price is $32,000 OBO without CCWs
i have well over that invested!!
I will also entertain trade offers..
Car is located in Hoffman Estates, IL
Can be reached the easiest Via text anytime 847-707-8013
Don't mind the plates from my z06 i had prior to this vette
Motor and Heads
Video with new motor
Last edited by Badd LS6; 01-25-2014 at 05:45 PM.
12-03-2012, 11:45 AM
#7
Burning Brakes
How much for the blue suburban in the background??
On a serious note the car is clean as can be and a great deal. OP is selling because his hustle was blown by a black C6.
On a serious note the car is clean as can be and a great deal. OP is selling because his hustle was blown by a black C6.
12-18-2012, 07:31 AM
#12
Melting Slicks
Have you taken the bad boy down the 1/4 mile? Why just 70 miles and selling? Man you just got it ready it sounds like. I'm getting ready to sell my supercharged g8gt that makes over 500 rwhp, I'd be willing to talk to you about close to an even trade. Car has run 11.80's on 456 rwhp, now with an extra 60 and 12 lbs of boost should run 1160's maybe 50's with good weather.
12-18-2012, 01:59 PM
#13
Drifting
Thread Starter
Member Since: Feb 2009
Location: Hoffman Estates Illinois
Posts: 1,408
Likes: 0
Received 0 Likes
on
0 Posts
it has not been down the 1/4 on the new setup..with the old motor that was cam only it has run consistant 10.70s...im selling because I got F'd over at my job and i need the money for more important things.. ill have a vette again some day lol
12-18-2012, 03:03 PM
#14
Melting Slicks
Just in case you change your mind, here are some pics. I've had a C4 and C5 and kinda miss having a vet. I've owned this car since new and its really a killer ride.
