Strange wires coming from HUD
#1
Instructor
Thread Starter
Member Since: May 2012
Location: Charleston WV
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Strange wires coming from HUD
I decided to tackle the falling HUD fix yesterday and it went off without a hitch. It works great now and shows on the windshield clearly.. However, after I took the projector out of the car to work on it I noticed that there were wires coming from the back of the unit that ran to nowhere. You can see them in the picture and all four wires are just cut off, no plug or anything, they were just laying in the dash not doing a thing. They cant be too terribly important as they HUD seems to work just fine, but I would like to know what they would normally go to or maybe if this HUD came from another vehicle that had some other capability that this car does not have
Any help is appreciated
Any help is appreciated
#2
Tech Contributor
Member Since: Dec 1999
Location: Anthony TX
Posts: 32,736
Received 2,180 Likes
on
1,583 Posts
CI 6,7,8,9,11 Vet
St. Jude Donor '08
People have attempted to install a DISPLAY UNIT for different radar detectors so that it too displays in the HUD Display. I know the Valentine 1 (V1) has a remote display that people install in the HUD. Could be a left over wire attempt or failure from something like that. Where do they go inside the HUD module?
Bill
Bill
#3
Instructor
Thread Starter
Member Since: May 2012
Location: Charleston WV
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
I posted a pic but if you cannot see it the wires go directly into the main projector, the part that lights up the image to be displayed. It is actually two "sets" of wires, a blue and a red twisted together making a total of 4 wires coming from the display.. I may try to open up the projector screen to see exactly where those wires go :-)
#4
Melting Slicks
From the picture posted it looks like there are 2 LEDs mounted on the sides of the display. Those wires are probably going to them.
As Bill said, this is probably from some kind of radar detector install.
Gary
As Bill said, this is probably from some kind of radar detector install.
Gary
#5
Instructor
Thread Starter
Member Since: May 2012
Location: Charleston WV
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Well in that case I can rest assured nothing is "missing".. I can just leave the wires and, who knows, maybe sometime I will find a use for them
#8
Team Owner
#9
Instructor
Thread Starter
Member Since: May 2012
Location: Charleston WV
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Whatever the case may be I removed them and performed the falling HUD fix (which worked great) and I am back in business.. Thanks for the insight guys