Severio2

Where does everyone get there 2008 + consoles from? The prices have went up over $200 from a few years ago.... Anyone know where I can get one cheaper?

ricknyc23

If you are looking for the hydrocarbon, check out TKO Performance.

EVRose

I got mine from Performance Corvettes.

mpuzach

Cheaper than what? What prices are you seeing out there?

BTW, even if your car has heated seats don't spend the extra $$$ for a console bezel with heated seat buttons. You can very easily transplant the buttons from your old bezel to the new one.

TKO Performance

Another option is we can apply the GM 2008-2009 finsih to a 2005-2007 center radio/shifter console too.
Much cheaper and the results are awesome.

We can also do the center radio/shifter console in the GM 2010-2012 pattern too. Below is a picture of the console we did in a GM 2010-2012 4lt finish (We just added the stainless trim rings)


And then there is our Gun Metal carbon Fiber Finish too...


Colored:


If your interested, click below. Look around & then just select the finish you want from the drop down menu.
http://store.tkoperformance.com/20052007.html

To see more items done in the 2008-2009 finish click here:
http://store.tkoperformance.com/2008.html

To see more items done in the 2010-2012 finish click here:
http://store.tkoperformance.com/2010.html

To see why more people have chosen us to do their custom interiors over the years, CLICK HERE!
http://tkoperformance.com/interiorcompare.html

Any questions, just call 800 778 9898 or Email us at sales@tkoperformance.com


Ed

SUB VETTE

Performance Corvettes provided mine

Bedouin

..or you can just pull the center console & wrap it in matte-black 3M self adhesive vinyl for about $30...

Severio2

Very
Nice!!

Severio2

Over $525.... They were under $400 a year ago..

Snake.Oiler

Was this Di-noc or 1080?

Bumpnrun

Ebay...around $400. thats where I got mine a few years back

Bedouin

Snake, I can't recall if it was di-noc or 1080, but I'm certain it was 3M. I just happened to have a sign shop near work that also did partial wraps on police/gov't cars & had a big piece of it on hand for $30.

If you do this with the matte black you'll be surprised how durable it is, & how well it matches all the other matte black stock trim. Couple pointers; be sure to leave enough material inside of the cut-outs, corners especially (vent ports, radio hole, etc) so that you can pull it tight enough so that it adheres completely & doesn't release at all.

Lastly, heat & pull the material tightly around/over the holes, for the shifter & drink holder especially, to prevent it from getting air tiny bubbles under it. Otherwise it's pretty straightforward to install this stuff & it's easy to pull the console & re-do certain spots if they're not perfect.