Converting to a mn6 from a mn12
#1
Converting to a mn6 from a mn12
I have a buddy w a c5zo6 w a 441 ci putting down around 580 to the wheels. He is looking to convert to a mn6 for road racing. What all is involved with converting to a mn6 from a mn12?
#2
Team Owner
Member Since: Sep 2003
Location: Raleigh / Rolesville NC
Posts: 43,084
Likes: 0
Received 25 Likes
on
25 Posts
Not a big deal. many guys take out the MN12 for an MN6 or have it rebuilt
RPM trans can do it.
But use a .84 5th gear and a .75 or .6 for 6th gear
Dog rings are nice too, no lift shift
RPM trans can do it.
But use a .84 5th gear and a .75 or .6 for 6th gear
Dog rings are nice too, no lift shift
#3
Burning Brakes
Member Since: Jul 2009
Location: Sarasota,FL & NW Indiana
Posts: 772
Likes: 0
Received 7 Likes
on
4 Posts
ME2 --------2012 stock
1st - 2.26
2nd - 1.58
3rd - 1.18
4th - 1.00
5th - 0.71
6th - 0.50
MH3----------2009-2011(2012 w/ PDE)
1st - 2.29
2nd- 1.61
3rd - 1.21
4th - 1.00
5th - 0.81
6th - 0.67
I think these are correct, best to call RPM Transmissions for answers
IMHO
Jim
Last edited by jjtoma; 04-23-2012 at 11:28 AM.
#4
If I get my MN12 refreshed I'm going with MN6 1-4 and MN12 5-6 gears. Not interested in pulling 200mph in 5th, I'd rather have useability.
#6
Safety Car
Funny that GM put the MN12 in there to make the car seem more like a track car. Then, the track guys take it out in favor of the Coupe transmission. Are the guys doing the swap still around the same power level as stock?
#7
Supporting Vendor
Member Since: Apr 2011
Location: Frederick Maryland
Posts: 3,178
Likes: 0
Received 147 Likes
on
111 Posts
St. Jude Donor '08-'09-'10-'11-'12, '14-'15-'16-'17-'18
First of all, let's get the RPO's right.
MN6 is the code for the manual transmission option.
MM6 is the 2.66 first gear T56.
M12 is the Z06 2.97 first gear T56.
The M12 AND MM6 share the EXACT same 5/6 gears. The difference in ratio is the head gear reduction and NOT the 5/6 gears.
TR6060 transmissions can be set up for any combinations on the overdrive.
MN6 is the code for the manual transmission option.
MM6 is the 2.66 first gear T56.
M12 is the Z06 2.97 first gear T56.
TR6060 transmissions can be set up for any combinations on the overdrive.
#8
Team Owner
Member Since: Sep 2003
Location: Raleigh / Rolesville NC
Posts: 43,084
Likes: 0
Received 25 Likes
on
25 Posts
On the ZR1 it is also very good, but north of 580 to the ground, that is wheel speed or could be in each gear
Hell I only run 400 to the ground and I can wheel speed in 3 gears.
the MN12 was to get better Zero to 60 times, the MN12 3-4 is a great combo, but the 2-3 is too much of a jump.
part of the other challenge is with the MN12, 3rd is too high for many low speed corners,but 2nd is too low, where the mn6 3rd is just a better gear for many corners.